Tuesday, May 31, 2022

My 560SL has electricial issues. I need a shop.

I think I need to give up. I've tried and I can't figure this one out. Radio, climate control, don't work. If I could find a shop in Southern California I would take it to them.
I think I need to give up. I've tried and I can't figure this one out. Radio, climate control, don't work. If I could find a shop in Southern California I would take it to them.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Mercedes 220 SEb front windscreen chrome

Good afternoon all. Can somebody point me towards a service or a solution to get my front windscreen chrome surround refitted? I had all of the bright work rechromed, but nobody wants to tackle the trim on the curved front windscreen. Had three refusals so far. I am based in London SW15. Thank you Andrew
Good afternoon all.
Can somebody point me towards a service or a solution to get my front windscreen chrome surround refitted? I had all of the bright work rechromed, but nobody wants to tackle the trim on the curved front windscreen. Had three refusals so far. I am based in London SW15.

Thank you

Andrew

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

E55 AMG 2004 MODEL: IN-CAR ENTERTAINMENT UPGRADE AND ANDROID PHONE.

Hello everyone. Nice to meet you all. I have an E55 AMG 2004 Model. Is there an easy way to upgrade the in-car telephony to allow android phone connectivty. Also looking to stream music via bluetooth through the existing Harman sound system. Any help greatly appreciated.
Hello everyone. Nice to meet you all.

I have an E55 AMG 2004 Model. Is there an easy way to upgrade the in-car telephony to allow android phone connectivty. Also looking to stream music via bluetooth through the existing Harman sound system.

Any help greatly appreciated.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Confusing wipers with gear shifter

My wife just had to have a gla250. It's 2019 with 15,000 miles. Other day, she tried using the windshield wipers and the car slammed into park because she confused the side ( other car had windshield wipers on the right side). She was traveling at low speed. Is this normal? Is there a fail safe for this to happen at a higher rate of speed? Also, the car did the same thing while I opened the door at a drive through. Any advice appreciated. I hate this car.
My wife just had to have a gla250. It's 2019 with 15,000 miles. Other day, she tried using the windshield wipers and the car slammed into park because she confused the side ( other car had windshield wipers on the right side). She was traveling at low speed. Is this normal? Is there a fail safe for this to happen at a higher rate of speed? Also, the car did the same thing while I opened the door at a drive through. Any advice appreciated. I hate this car.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

2020 GLE350 extended warranty

Guys , I passed 50k mark and can't purchase MB extended warranty . What is the best extended warranty company for MB? I called my dealership and they said no extended warranty is good because they don't pay MB labor rate and you have to pay the difference on any repair not approved by extended warranty company. what is best reputable company to purchase extended warranty ? please advise Thanks
Guys ,
I passed 50k mark and can't purchase MB extended warranty . What is the best extended warranty company for MB?
I called my dealership and they said no extended warranty is good because they don't pay MB labor rate and you have to pay the difference on any repair not approved by extended warranty company.

what is best reputable company to purchase extended warranty ?

please advise
Thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

W211 E500: E55 Conversion

Hey guys I have an 05 E500, I love it's a great car but I was wondering how hard would it be to replace the engine with an E55 motor, I know you'll going to say "Just sell and get an E55" but where I live the E55 is WAY more more than double. Anyways a friend of mine is a wrecker and they just got a smashed E55, it was smashed from the rear so the engines alright. He's giving me a great price on it, I have 8 days to decide. This got me really thinking cos the labor would be done by him he... W211 E500: E55 Conversion
Hey guys I have an 05 E500, I love it's a great car but I was wondering how hard would it be to replace the engine with an E55 motor, I know you'll going to say "Just sell and get an E55" but where I live the E55 is WAY more more than double. Anyways a friend of mine is a wrecker and they just got a smashed E55, it was smashed from the rear so the engines alright. He's giving me a great price on it, I have 8 days to decide. This got me really thinking cos the labor would be done by him he...

W211 E500: E55 Conversion

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

MediumTickingNoise/SeldomlySmokeFromExhaust

New member here. First off thanks to everyone on this benz community forum. For close to 4 years now, i own a 2001 e320 4d base model: *248,000 miles Replaced transmission conductor plate 1 year ago Replaced transmission oil plug 4 months ago Pretty frequent but inconsistent ticking noise from lifters From last 2 oil changes "Reduce engine oil light" appears often Due to lack of realization and a ton of emotion i have attempted to care for my car. I really... MediumTickingNoise/SeldomlySmokeFromExhaust
New member here. First off thanks to everyone on this benz community forum.
For close to 4 years now, i own a 2001 e320 4d base model:
  1. *248,000 miles
  2. Replaced transmission conductor plate 1 year ago
  3. Replaced transmission oil plug 4 months ago
  4. Pretty frequent but inconsistent ticking noise from lifters
  5. From last 2 oil changes "Reduce engine oil light" appears often
Due to lack of realization and a ton of emotion i have attempted to care for my car. I really...

MediumTickingNoise/SeldomlySmokeFromExhaust

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

THE TRUTH ABOUT SPARK PLUG WIRE

Hello benz lover,,, i am owner of w123 m110 engine 280e , just got new spark plug wire form called BBT GERMANY, because the existing wire by BERU, got bitten by rat, the question is, on the band new cable, is it normal if they still have leaking electricity, ?. I am checking in the dark , on wet and dry condition, i still can see there' some electricity jump to the engine block,,,,,,, OR , on brand new cable, there's should not have any leak electricity, even a little tiny leak,,.?....i... THE TRUTH ABOUT SPARK PLUG WIRE
Hello benz lover,,, i am owner of w123 m110 engine 280e , just got new spark plug wire form called BBT GERMANY, because the existing wire by BERU, got bitten by rat, the question is,
on the band new cable, is it normal if they still have leaking electricity, ?. I am checking in the dark , on wet and dry condition, i still can see there' some electricity jump to the engine block,,,,,,,
OR , on brand new cable, there's should not have any leak electricity, even a little tiny leak,,.?....i...

THE TRUTH ABOUT SPARK PLUG WIRE

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Link to Hagerty Discussion re. SLs

Last night I viewed an interesting Hagerty discussion of SLs, including overviews, present, and potential future collectability, valuations, etc. The discussion begins with the original 300 through the R129, including our 107s. Here is the link: Mercedes-Benz SLs to Have and to Hold For almost 70 years, The Mercedes-Benz SL series has melded style, luxury, and high performance. Every one of the SLs has been instantly collectible, and several models have remained remarkably affordable. Join The Broad Arrow Group's Alain Squindo as he leads a discussion about both the SLs... click.member.hagerty.com
Last night I viewed an interesting Hagerty discussion of SLs, including overviews, present, and potential future collectability, valuations, etc. The discussion begins with the original 300 through the R129, including our 107s.
Here is the link:

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Which car is best in low budget?


Top Cars Under 5 Lakhs 2021ModelPriceTata TiagoRs. 4.85 - 6.84 LakhRenault KWIDRs. 3.12 - 5.31 LakhMaruti AltoRs. 2.99 - 4.60 LakhMaruti CelerioRs. 4.65 - 5.90 Lakh1 more rowCars Under 5 Lakhs in India 2021, Best & Cheapest Low Price Cars ...

ODB Adapter

Hi, i have w210 from 2000, it dont have obd connector only 38pin for Star diagnosis. I find 38pin to obd adapter. If i buy this one and connect to odb bluetooth interface it will at least read codes and can delete?
Hi, i have w210 from 2000, it dont have obd connector only 38pin for Star diagnosis. I find 38pin to obd adapter. If i buy this one and connect to odb bluetooth interface it will at least read codes and can delete?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

12-15 Mercedes W204 C250 SLK250 M271 Engine Motor Assembly 1.8L I4 RWD OEM 90k

...​ 12-15 Mercedes W204 C250 SLK250 M271 Engine Motor Assembly 1.8L I4 RWD OEM 90k
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Parts available from 2015 Mercedes-Benz С250

Hello BenzWorld! We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts. We want to be the solution for your Mercedes needs. Please feel free to reach out if you have any questions. Let us know what parts you need or message us for part fitment assistance. AutoHub Shop 3131 Sankey Rd #28 Pleasant Grove, CA 95668 (916) 759-7316 Mon-Fri 9AM-5PM PST ... ​ Parts available from 2015 Mercedes-Benz С250

Hello BenzWorld!

We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts.
We want to be the solution for your Mercedes needs.
Please feel free to reach out if you have any questions.
Let us know what parts you need or message us for part fitment assistance.

AutoHub Shop
3131 Sankey Rd #28
Pleasant Grove, CA 95668
(916) 759-7316

Mon-Fri 9AM-5PM PST

...

Parts available from 2015 Mercedes-Benz С250

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Parts available from 2013 Mercedes-Benz С250

Hello BenzWorld! We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts. We want to be the solution for your Mercedes needs. Please feel free to reach out if you have any questions. Let us know what parts you need or message us for part fitment assistance. AutoHub Shop 3131 Sankey Rd #28 Pleasant Grove, CA 95668 (916) 759-7316 Mon-Fri 9AM-5PM PST ...​ Parts available from 2013 Mercedes-Benz С250

Hello BenzWorld!

We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts.
We want to be the solution for your Mercedes needs.
Please feel free to reach out if you have any questions.
Let us know what parts you need or message us for part fitment assistance.

AutoHub Shop
3131 Sankey Rd #28
Pleasant Grove, CA 95668
(916) 759-7316

Mon-Fri 9AM-5PM PST
...​

Parts available from 2013 Mercedes-Benz С250

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

top dead center?

After replacing the crank pos sensor on my c180 how do i get it to TDC,or just wack it in.Still not starting.HELP anyone please.
After replacing the crank pos sensor on my c180 how do i get it to TDC,or just wack it in.Still not starting.HELP anyone please.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

hay guys & girls haha

:):):)

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

my c180 is doing my head in errrr.

Just replaced crank pos sensor.Not sure how to get it to top dead center,if thats a thing hhaha help please.
Just replaced crank pos sensor.Not sure how to get it to top dead center,if thats a thing hhaha help please.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Photo DIY: Upper Control Arm R/R

After nearly 200k Miles of service.... the Front Upper Control Arms (UCA's) were in need of change. Symptoms?? Very slight steering wheel vibration at around 50 mph. After lifting wheel, and checking for free-play, this is what I encountered: Because I had recently replaced Lower Control Arm Bushings, and Lower Supporting Joint, plus re-packing/adjusting the wheel bearings to spec... the only 'Logical' component which would explain a 12/6 o'clock... Photo DIY: Upper Control Arm R/R
After nearly 200k Miles of service.... the Front Upper Control Arms (UCA's) were in need of change.

Symptoms?? Very slight steering wheel vibration at around 50 mph.

After lifting wheel, and checking for free-play, this is what I encountered:


Because I had recently replaced Lower Control Arm Bushings, and Lower Supporting Joint, plus re-packing/adjusting the wheel bearings to spec... the only 'Logical' component which would explain a 12/6 o'clock...

Photo DIY: Upper Control Arm R/R

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Limb mode

Hello guys , I'm having a problem with my car w203 automatic , it's in limb mode the machine says it's gearbox but we have changed more than 3 gearboxes and still its not changing. What could be the possible problem here ?
Hello guys , I'm having a problem with my car w203 automatic , it's in limb mode the machine says it's gearbox but we have changed more than 3 gearboxes and still its not changing. What could be the possible problem here ?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Monday, May 30, 2022

E55 Reliability at higher mileage

Hi guys. I am looking to purchase high mileage e55 (163,104 miles). Only 2 owners. What do you guys think about this? I know that e320s are fairly reliable (and I currently own one and w124 e320 ) but what about the AMG lineup. What are the things to look out for when buying one.
Hi guys. I am looking to purchase high mileage e55 (163,104 miles). Only 2 owners. What do you guys think about this? I know that e320s are fairly reliable (and I currently own one and w124 e320 ) but what about the AMG lineup. What are the things to look out for when buying one.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

E55 High Mileage Reliability

Hi guys. I am looking to purchase high mileage e55 (163,104 miles). Only 2 owners. What do you guys think about this? I know that e320s are fairly reliable (and I currently own one and w124 e320 ) but what about the AMG lineup. What are the things to look out for when buying one.
Hi guys. I am looking to purchase high mileage e55 (163,104 miles). Only 2 owners. What do you guys think about this? I know that e320s are fairly reliable (and I currently own one and w124 e320 ) but what about the AMG lineup. What are the things to look out for when buying one.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Front camber adjustment due to lowering further than factory spec can handle

I've not been on this forum for a while and I seem to have missed some goings on? I took a 1994 SL 320 as a trade on a car I was selling a few years ago. The more I drove it the more I liked it. It HAS had expensive issues.....trans, heater matrix, and head gasket....but all is currently well, except for the apparently typical leaking roof rams. When I was last on here I was researching camber adjustment....both front and rear, as this car was seriously lowered when I took ownership. I... Front camber adjustment due to lowering further than factory spec can handle
I've not been on this forum for a while and I seem to have missed some goings on?
I took a 1994 SL 320 as a trade on a car I was selling a few years ago. The more I drove it the more I liked it. It HAS had expensive issues.....trans, heater matrix, and head gasket....but all is currently well, except for the apparently typical leaking roof rams.
When I was last on here I was researching camber adjustment....both front and rear, as this car was seriously lowered when I took ownership. I...

Front camber adjustment due to lowering further than factory spec can handle

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Run away 300

I have an '87 300TD with 200+k. About 6 years ago I had a problem with the oil cooler. At the time had it pressure tested, and bolted it back on. While putting it on, I accidentally pressed on on the i.p. shut off. It made an odd noise and stayed in the down position no matter what I did. The project got put on the back burner for years, but today I had time to try and start it. I propped the shut off lever in the up position thinking it would allow the engine to start. After a lot of... Run away 300
I have an '87 300TD with 200+k. About 6 years ago I had a problem with the oil cooler. At the time had it pressure tested, and bolted it back on. While putting it on, I accidentally pressed on on the i.p. shut off. It made an odd noise and stayed in the down position no matter what I did. The project got put on the back burner for years, but today I had time to try and start it. I propped the shut off lever in the up position thinking it would allow the engine to start. After a lot of...

Run away 300

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Plastic Surgery on 560 SEC: Chin reduction via bumper replacement

Heya guys! I absolutely love the body, lines, everything of the 560SEC, but just can't get over the jutting front "chin" of the US bumper compared to aftermarket and Euro bumpers. It is even more pronounced when lowered: My question is, what would be the best approach to deleting the chin, from both a economical and quality perspective. Euro bumpers seem difficult to source and if coming from Europe... Plastic Surgery on 560 SEC: Chin reduction via bumper replacement
Heya guys!

I absolutely love the body, lines, everything of the 560SEC, but just can't get over the jutting front "chin" of the US bumper compared to aftermarket and Euro bumpers.

It is even more pronounced when lowered:











My question is, what would be the best approach to deleting the chin, from both a economical and quality perspective.



Euro bumpers seem difficult to source and if coming from Europe...

Plastic Surgery on 560 SEC: Chin reduction via bumper replacement

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

MY2007 W211 E550 Sport Mercedes Benz.

I have an Australian (RHD) W211 E550 Sport and my right headlight just stopped working, I have swapped the left side headlight to the right side and it still doesn't work. I have had the car inside for 2 years, however, it was started every week without any problems, the centre of the speedometer says "low beam headlight problem". Any help would be much appreciated. Thank you in advance, Cookey Downunder.
I have an Australian (RHD) W211 E550 Sport and my right headlight just stopped working, I have swapped the left side headlight to the right side and it still doesn't work. I have had the car inside for 2 years, however, it was started every week without any problems, the centre of the speedometer says "low beam headlight problem".

Any help would be much appreciated.
Thank you in advance,
Cookey Downunder.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

W211 E270 headlight cluster failure

All the headlight cluster on the passenger side (I'm in the UK by the way!) has decided not to switch on. That's headlight, high beam, sidelight, fog light and indicator. The driver's side works fine as do all the rear lights and the indicators in the side mirrors. The dealer said he would like to take it in to investigate but I was wondering if anyone has had a similar experience and can suggest a fix. Thank you
All the headlight cluster on the passenger side (I'm in the UK by the way!) has decided not to switch on. That's headlight, high beam, sidelight, fog light and indicator. The driver's side works fine as do all the rear lights and the indicators in the side mirrors.

The dealer said he would like to take it in to investigate but I was wondering if anyone has had a similar experience and can suggest a fix.

Thank you

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Trick to open stuck glove box on 2003 SL500 !?

I saw a "how-to " on here of how to open a stuck glove box, but when I took of my side panel, it didn't look the same and have a "tension adjustment" mechanism. I have attached a photo. Is there another trick to getting this open ? I would appreciate any assistance with this ! Thank you very much ! -Dave
I saw a "how-to " on here of how to open a stuck glove box, but when I took of my side panel, it didn't look the same and have a "tension adjustment" mechanism.

I have attached a photo. Is there another trick to getting this open ? I would appreciate any assistance with this !

Thank you very much !

-Dave

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Losing power going up hill, rough idle, horrible gas milage

Changed the map, maf, fuel pump, computer, suspension compressor. Lots of mis fire codes lean codes.. im confused and dont know what to do please help. Here is a list of codes.. each picture is a code set.. they change. Im dumbfounded Here are some more advanced readings [ATTACH... Losing power going up hill, rough idle, horrible gas milage
Changed the map, maf, fuel pump, computer, suspension compressor.

Lots of mis fire codes lean codes.. im confused and dont know what to do please help. Here is a list of codes.. each picture is a code set.. they change. Im dumbfounded




Here are some more advanced readings


[ATTACH...

Losing power going up hill, rough idle, horrible gas milage

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Repairing ABS Motor?

After replacing all 4 wheel speed sensor, I recently (about a hundred miles of bliss no fault light driving 😢) had the ESP light (ONLY esp, no abs light) come up a few times. Scanner gives the following codes: 5967 Power supply High Pressure Pump 5938 Check component 6001 The supply voltage of the control unit is too low (stored - most likely from battery replacement, but I cant seem to erase it?) Battery is good (12.7V cold before start, 14.1V engine running). Are the ABS pump motors... Repairing ABS Motor?
After replacing all 4 wheel speed sensor, I recently (about a hundred miles of bliss no fault light driving 😢) had the ESP light (ONLY esp, no abs light) come up a few times. Scanner gives the following codes:

5967 Power supply High Pressure Pump
5938 Check component
6001 The supply voltage of the control unit is too low (stored - most likely from battery replacement, but I cant seem to erase it?)

Battery is good (12.7V cold before start, 14.1V engine running).

Are the ABS pump motors...

Repairing ABS Motor?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

1989 300E Aftermarket HU install (without active bass)

Hello fellow W124 owners! I have been on here a few times before, asking questions about installing an aftermarket radio. Well, today was my first day off in a couple weeks and I got bored. My Becker quit out officially yesterday after only working while I had the heat on for 20 mins. There are countless threads from all over about the dreaded aftermarket HU installs on these, and I'm here today to put those to rest. My w124 is *WITHOUT active bass* I searched hours trying to find that one... 1989 300E Aftermarket HU install (without active bass)
Hello fellow W124 owners! I have been on here a few times before, asking questions about installing an aftermarket radio. Well, today was my first day off in a couple weeks and I got bored. My Becker quit out officially yesterday after only working while I had the heat on for 20 mins. There are countless threads from all over about the dreaded aftermarket HU installs on these, and I'm here today to put those to rest. My w124 is *WITHOUT active bass* I searched hours trying to find that one...

1989 300E Aftermarket HU install (without active bass)

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

1998 SL500 Hydraulics - Victoria, BC

Hi everyone, Planning on having my hydraulic cylinders removed and sent to Klaus for rebuild this fall/winter. Wondering if anyone here has had this job done in Victoria and if so, which shop(s). Any other tips, tricks or insight is much appreciated!
Hi everyone,

Planning on having my hydraulic cylinders removed and sent to Klaus for rebuild this fall/winter. Wondering if anyone here has had this job done in Victoria and if so, which shop(s). Any other tips, tricks or insight is much appreciated!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

2000 ML430 Leaking Fuel between filler neck and tank please help.

Hello Everyone, I'm new here. Have a 2000 ML430 and am leaking fuel between the filler neck and the tank itself. It looks like there is a round tanish/white piece that the filler neck connect to to enter the tank. It only leaks when the vehicle is started and subsides when the vehicle is off. Does anyone have any recommendations or maybe a part number for the plastic piece that connect to the tank? Or should I just replace the whole tank? Thank you for your time and any help is greatly... 2000 ML430 Leaking Fuel between filler neck and tank please help.
Hello Everyone, I'm new here. Have a 2000 ML430 and am leaking fuel between the filler neck and the tank itself. It looks like there is a round tanish/white piece that the filler neck connect to to enter the tank. It only leaks when the vehicle is started and subsides when the vehicle is off.

Does anyone have any recommendations or maybe a part number for the plastic piece that connect to the tank? Or should I just replace the whole tank? Thank you for your time and any help is greatly...

2000 ML430 Leaking Fuel between filler neck and tank please help.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Clicking noise during left turn

2013 R350 BlueTEC 4 MATIC, Canada I hear a clicking noise during a left turn. I jacked up the front left tire yesterday tried to shake it in all directions, no moves at all. I removed the tire and check all the bushings, tire rod, control arm, etc., didn't see any damages. Power steering fluid is full. Any idea where else shall I check?
2013 R350 BlueTEC 4 MATIC, Canada

I hear a clicking noise during a left turn. I jacked up the front left tire yesterday tried to shake it in all directions, no moves at all. I removed the tire and check all the bushings, tire rod, control arm, etc., didn't see any damages. Power steering fluid is full.

Any idea where else shall I check?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Oil Cooler Replacement Cost on W221 M278

Anyone know what it cost to replace the oil cooler on the M278 engine in the W221. My car is a 2013 S550 and I see drips of blue antifreeze mixed with oil all over the bottom of the bottom pully on driver side just below the oil cooler, so its my guess that maybe the oil cooler is leaking and needs replacing. Approximate cost at dealership? Is it easy to do it yourself?
Anyone know what it cost to replace the oil cooler on the M278 engine in the W221. My car is a 2013 S550 and I see drips of blue antifreeze mixed with oil all over the bottom of the bottom pully on driver side just below the oil cooler, so its my guess that maybe the oil cooler is leaking and needs replacing.

Approximate cost at dealership?

Is it easy to do it yourself?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

what does "ML" stand for?

was driving today and there was a ML in front of me at the light and I was just looking and comparing his to mine, and was looking at the "ML320" on the back hatch and I was thinking... what could the "ML" possibly stand for? or "E" or "C" or "S" ect... does anyone know
was driving today and there was a ML in front of me at the light and I was just looking and comparing his to mine:D, and was looking at the "ML320" on the back hatch and I was thinking... what could the "ML" possibly stand for?
or "E" or "C" or "S" ect...

does anyone know:confused:

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

C230 Kompressor. Even more winning!

Induction & Shifter. Just a little update (on my previous thread '98 C230 Kompressor (manual) Sport ) Decided to enclose the CAI, basically put a lid on it instead of it sealed against the underside of the hood. This has reduced noise from the S/C which is exactly what I wanted but not hindering inlet air flow. The two inlets still remain, 75 and 52 mm. It took more time than I anticipated - an... C230 Kompressor. Even more winning!
Induction & Shifter.

Just a little update (on my previous thread '98 C230 Kompressor (manual) Sport )

Decided to enclose the CAI, basically put a lid on it instead of it sealed against the underside of the hood. This has reduced noise from the S/C which is exactly what I wanted but not hindering inlet air flow. The two inlets still remain, 75 and 52 mm.
It took more time than I anticipated - an...

C230 Kompressor. Even more winning!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

1979 W123 Coupe Distributor Cap Change..

Hi All Having had my baby (1979 230 C) a little while now, already changed gearbox oil/filter, oil/filter, air filter, sparks. Brakes are good. Next job is to change the dizzy cap, rotor arm and leads. Car starts on the button, drives very well. Occasionally when coming to stop and at idle, it judders once. When i say judder, it's almost like it skips a beat. This happens maybe once every 10 times its idling. Doesn't happen often, but enough for me to think maybe a leads/cap refresh is a... 1979 W123 Coupe Distributor Cap Change..
Hi All

Having had my baby (1979 230 C) a little while now, already changed gearbox oil/filter, oil/filter, air filter, sparks. Brakes are good.
Next job is to change the dizzy cap, rotor arm and leads. Car starts on the button, drives very well. Occasionally when coming to stop and at idle, it judders once. When i say judder, it's almost like it skips a beat. This happens maybe once every 10 times its idling. Doesn't happen often, but enough for me to think maybe a leads/cap refresh is a...

1979 W123 Coupe Distributor Cap Change..

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Please. Help me identify this wire and this relay.

Please. Could anyone help me identify this wire? It's a thicccccccc boi. Red with a green strip. I don't know where to connect the cable. One side is connected to this black relay that is connected to the fuel pump relay too... Please. Help me identify this wire and this relay.
Please.
Could anyone help me identify this wire?
It's a thicccccccc boi. Red with a green strip.

I don't know where to connect the cable.

One side is connected to this black relay that is connected to the fuel pump relay too...

Please. Help me identify this wire and this relay.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

The top 3 interior detailing products for newer AMGs.

Finished my research. Thought I would share for AMGer's. Took a couple months, but finally done. Hope it helps! I didn't include glass cleaners, because we all know Stoners is the best. Love to hear some comments. The Comprehensive Interior Cleaning Product Guide for a Mercedes AMG
Finished my research. Thought I would share for AMGer's. Took a couple months, but finally done. Hope it helps! I didn't include glass cleaners, because we all know Stoners is the best.

Love to hear some comments.

The Comprehensive Interior Cleaning Product Guide for a Mercedes AMG

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Who at MB thought it would come from above??

Crumple zones...side impact protection...but who could have predicted this??
Crumple zones...side impact protection...but who could have predicted this??


---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

My instrument Cluster is driving me Crazy!

Hey Guys, I will try my best to write a understandable English So i have a W210 E300 Diesel, and my instrument cluster have literly self Live!! Some times works (the needles) and some times not. So Today,i arrived to a part store to buy a used Instrument Cluster, funny story, the only needle working is the Fuel one, and the fan from the AC auto starts (with the AC off) what the hell is this..i tryed like 4 or 5 different clusters, same story, only needle working was the fuel one AC... My instrument Cluster is driving me Crazy!
Hey Guys,

I will try my best to write a understandable English :)

So i have a W210 E300 Diesel, and my instrument cluster have literly self Live!! Some times works (the needles) and some times not.

So Today,i arrived to a part store to buy a used Instrument Cluster, funny story, the only needle working is the Fuel one, and the fan from the AC auto starts (with the AC off) :D what the hell is this..i tryed like 4 or 5 different clusters, same story, only needle working was the fuel one AC...

My instrument Cluster is driving me Crazy!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

New Member, Don P here.

Just signed up for BenzWorld as I recently acquired a 2003 W163. I'll be towing a 20 foot, ultra-light caravan as well as using it's very capable 4WD capacities for fun under the sun. I'm retired and lam based near Las Vegas, Nevada, USA. I'll be looking for help finding parts and servicing details as the odometer ticks off the miles. I appreciate all the information currently compiled here and look forward to your further assistance as it arrises.
Just signed up for BenzWorld as I recently acquired a 2003 W163. I'll be towing a 20 foot, ultra-light caravan as well as using it's very capable 4WD capacities for fun under the sun. I'm retired and lam based near Las Vegas, Nevada, USA. I'll be looking for help finding parts and servicing details as the odometer ticks off the miles. I appreciate all the information currently compiled here and look forward to your further assistance as it arrises.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

What is the Best Mercedes Scanner for the Home Mechanic?

Whether you just want to save a buck or love the challenge of repairing your modern day vehicle, you'll definitely want the best Mercedes scanner at your disposal. Trying to decipher that orange light in the dash? Good luck if you don't have the right OBD II scanner. The best scanners, though, can do more than just tell you the code that's set that light. They can give you real-time information about the health of your vehicle. From fuel trims to oil pressure to oxygen sensor health. Some... What is the Best Mercedes Scanner for the Home Mechanic?
Whether you just want to save a buck or love the challenge of repairing your modern day vehicle, you'll definitely want the best Mercedes scanner at your disposal.

Trying to decipher that orange light in the dash? Good luck if you don't have the right OBD II scanner. The best scanners, though, can do more than just tell you the code that's set that light. They can give you real-time information about the health of your vehicle. From fuel trims to oil pressure to oxygen sensor health. Some...

What is the Best Mercedes Scanner for the Home Mechanic?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

300TE Dogleg Transmission Guide??

In late 2020 I inherited my dad's old 300TE Wagon. It's a 1993 M104.992 with good 'ol HFM injection. He couldn't use it anymore because the reverse gear went out on it. I have never enjoyed cars with two pedals anyway so this felt like a good opportunity to murder two birds with one rock. While researching which transmission to install, caltar2 on eBay recommended swapping in a 717.430 and changing the rear differential at the same time otherwise the... 300TE Dogleg Transmission Guide??
In late 2020 I inherited my dad's old 300TE Wagon. It's a 1993 M104.992 with good 'ol HFM injection.

He couldn't use it anymore because the reverse gear went out on it. I have never enjoyed cars with two pedals anyway so this felt like a good opportunity to murder two birds with one rock. While researching which transmission to install, caltar2 on eBay recommended swapping in a 717.430 and changing the rear differential at the same time otherwise the...

300TE Dogleg Transmission Guide??

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

'15 W222 parts needed to replace grill 360 degree camera mechanism

I have a 2015 S63. Although my front grille doesn't have a single scratch on it, it appears that my grille camera mechanism is damaged; when you put the car in reverse, the camera displays an image, and then an X appears in the image (see photo) and the camera drops down. What parts do I need to get the front 360 degree camera mechanism to work properly (excluding the camera)?
I have a 2015 S63.

Although my front grille doesn't have a single scratch on it, it appears that my grille camera mechanism is damaged; when you put the car in reverse, the camera displays an image, and then an X appears in the image (see photo) and the camera drops down.

What parts do I need to get the front 360 degree camera mechanism to work properly (excluding the camera)?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Another purchase post 2001 CL600

Hi everyone, Currently own a 2004 S500 4matic and 2005 C240. After being a Benz owner for almost two years and leading to wrench turn on them I came across a 2001 CL600 with 55Kmi for asking price of 11k. Owner says he has all service records, runs and drives great. How are these cars as daily drivers? The M112/113 engines are so durable and fairly easy to work on plus aftermarket supplies are plentiful. I see the M137 is basically same engine with 2 extra cylinders But only made... Another purchase post 2001 CL600
Hi everyone,

Currently own a 2004 S500 4matic and 2005 C240. After being a Benz owner for almost two years and leading to wrench turn on them I came across a 2001 CL600 with 55Kmi for asking price of 11k. Owner says he has all service records, runs and drives great. How are these cars as daily drivers?

The M112/113 engines are so durable and fairly easy to work on plus aftermarket supplies are plentiful. I see the M137 is basically same engine with 2 extra cylinders But only made...

Another purchase post 2001 CL600

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

500 SL running bad at low RPM

Hello, I drive a European 500SL from 1987, and I have 2 minor issues : cold start is not ideal (4-5 sec with some gas) engine is running "square" at 1200-1500 rpm with lack of power, it comes alive above this rpm I think the KE Jetronic is mechanically OK, the distributor is recently checked and seals are replaced, and also a new coldstart valve and pressure regulator. Consumption is reasonable (15 L/km). Injectors are cleaned and new seals. I also put in 8 new spark... 500 SL running bad at low RPM
Hello,

I drive a European 500SL from 1987, and I have 2 minor issues :
  • cold start is not ideal (4-5 sec with some gas)
  • engine is running "square" at 1200-1500 rpm with lack of power, it comes alive above this rpm

I think the KE Jetronic is mechanically OK, the distributor is recently checked and seals are replaced, and also
a new coldstart valve and pressure regulator. Consumption is reasonable (15 L/km). Injectors are cleaned and new seals.
I also put in 8 new spark...

500 SL running bad at low RPM

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

2001 C240

Just got a hold C240 with 112000 miles and some maintenance records. I have changed oil (Mobil One 0W-40), tranny fluid (Shell ATF 134), and the differential (Valvoline SYN 75-95). Cabin and engine air filter changed as well. Also changed out the LCD diplay on the dash. Plugs were changed 5+ years ago but only 12K miles since the changed. Upper and lower control arms previously replaced as well. So far, runs well and passed the emissions testing here in GA. My 2001 BMW 525i just gave... 2001 C240
Just got a hold C240 with 112000 miles and some maintenance records. I have changed oil (Mobil One 0W-40), tranny fluid (Shell ATF 134), and the differential (Valvoline SYN 75-95). Cabin and engine air filter changed as well. Also changed out the LCD diplay on the dash. Plugs were changed 5+ years ago but only 12K miles since the changed. Upper and lower control arms previously replaced as well. So far, runs well and passed the emissions testing here in GA. My 2001 BMW 525i just gave...

2001 C240

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

What are your 3 Must have interior cleaning/detailing products?

Hi all, lurking finally joining. I have been losing my mind. I have a 2020 AMG C63s, and I wanted to look into buying some interior cleaning stuff for it, and I never realized how many different products there are. Its crazy. Some people swear by one, and others bash it lol. I was looking at this for simplicity: The Comprehensive Interior Cleaning Product Guide for a Mercedes... What are your 3 Must have interior cleaning/detailing products?
Hi all, lurking finally joining. I have been losing my mind. I have a 2020 AMG C63s, and I wanted to look into buying some interior cleaning stuff for it, and I never realized how many different products there are. Its crazy. Some people swear by one, and others bash it lol.

I was looking at this for simplicity: The Comprehensive Interior Cleaning Product Guide for a Mercedes...

What are your 3 Must have interior cleaning/detailing products?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Lubrication problem

Customer complain about little noise at top of engine on 2 banks at beginning. When comme to me I propose to change oil and filter. I did the oil and filter change. After I went to road test and during the test the engine is making big noise than before on 2 banks. When return back i opened the rocker cover for 2 banks I found high deposit of carbon dust in the covers and rockers. I cleaned covers and rockers with detergent and air blower gun. I start engine without covers and I found that... Lubrication problem
Customer complain about little noise at top of engine on 2 banks at beginning. When comme to me I propose to change oil and filter. I did the oil and filter change. After I went to road test and during the test the engine is making big noise than before on 2 banks. When return back i opened the rocker cover for 2 banks I found high deposit of carbon dust in the covers and rockers. I cleaned covers and rockers with detergent and air blower gun. I start engine without covers and I found that...

Lubrication problem

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

W124 Cab Back Deck Faded

I was doing some interior trim and leather cleaning today and after trying to take a few spots off the back deck with the cleaner (Car Guys interior stuff) I noticed some grey smudges in the black. After trying to remove what I though was residue, most of the back deck is now showing a lot of sun fade. Before the wipe down with water and microfiber, the deck has a nice sheen and looked in great shape. Now it looks like it spent 10 years sitting in the desert. Are there any products that... W124 Cab Back Deck Faded
I was doing some interior trim and leather cleaning today and after trying to take a few spots off the back deck with the cleaner (Car Guys interior stuff) I noticed some grey smudges in the black. After trying to remove what I though was residue, most of the back deck is now showing a lot of sun fade. Before the wipe down with water and microfiber, the deck has a nice sheen and looked in great shape. Now it looks like it spent 10 years sitting in the desert.

Are there any products that...

W124 Cab Back Deck Faded

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Code p0016 / 1208, no p0017 / 1200 on 2009 e350

I bought a 2009 e350 literally yesterday and that code has no showed. I have absolutely no knowledge on the engine (yet) but am familiar with German cars in general. I had purchased the 09 since it fixed the balance shaft/sprocket issue, but it seems my code says there is something wrong with timing. I figured I'd have a little more time to figure out the engine before having problems, but it seems I got unlucky. Did I get scammed? Maybe, but the codes haven't been reset for 370 miles so it... Code p0016 / 1208, no p0017 / 1200 on 2009 e350
I bought a 2009 e350 literally yesterday and that code has no showed. I have absolutely no knowledge on the engine (yet) but am familiar with German cars in general. I had purchased the 09 since it fixed the balance shaft/sprocket issue, but it seems my code says there is something wrong with timing.

I figured I'd have a little more time to figure out the engine before having problems, but it seems I got unlucky. Did I get scammed? Maybe, but the codes haven't been reset for 370 miles so it...

Code p0016 / 1208, no p0017 / 1200 on 2009 e350

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

09 e320 Dual Mass Air Flow Sensor - Limping?

Hey everyone I have a 2009 E320 bluetech - diesel, 65K. I recently started experiencing occasional limp mode while driving after having excelled really quickly. The system told me I needed a mask airflow sensor replaced and of course I did that. Since that replacement I feel like it's occurring more regularly. My assumption is that it's a bad airflow sensor that they installed? The error for the Mass Airflow Sensor still shows...any thoughts? Vaccum leak?
Hey everyone I have a 2009 E320 bluetech - diesel, 65K. I recently started experiencing occasional limp mode while driving after having excelled really quickly.

The system told me I needed a mask airflow sensor replaced and of course I did that. Since that replacement I feel like it's occurring more regularly. My assumption is that it's a bad airflow sensor that they installed? The error for the Mass Airflow Sensor still shows...any thoughts? Vaccum leak?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

300SL multifunction Relay Wiring

Perhaps a long shot, but I will humbly ask. I had to replace the Multifunction Relay (N10) on my 92 300sl due to stuck turn signal, however the wiring 21 pin connector was in bad shape and no longer holding the wires in place. As such, I need a wiring schematic depicting the proper wiring placement. I signed up for AllData, so far futile. Any leads will be immensely welcomed.
Perhaps a long shot, but I will humbly ask.
I had to replace the Multifunction Relay (N10) on my 92 300sl due to stuck turn signal, however the wiring 21 pin connector was in bad shape and no longer holding the wires in place. As such, I need a wiring schematic depicting the proper wiring placement. I signed up for AllData, so far futile.
Any leads will be immensely welcomed.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

M119 Valve Cover Bolts

This is ridiculous. Can't find these on any site. I would like originals, only need 1 or 2. The outer driver side screw at the firewall stripped when trying to get it out. Luckily, the Irwin 5/8" extractor barely got in there and I was able to take it out. To boot, the screws appear to have been over-torqued, might explain the leaking. Tricky area there with the fuel and misc other hoses. Anyway, I found these M6 x 1.0 in 35mm length (the originals are 32mm) and measured the hole, they... M119 Valve Cover Bolts
This is ridiculous. Can't find these on any site. I would like originals, only need 1 or 2. The outer driver side screw at the firewall stripped when trying to get it out. Luckily, the Irwin 5/8" extractor barely got in there and I was able to take it out. To boot, the screws appear to have been over-torqued, might explain the leaking. Tricky area there with the fuel and misc other hoses. Anyway, I found these M6 x 1.0 in 35mm length (the originals are 32mm) and measured the hole, they...

M119 Valve Cover Bolts

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

2003 W209 320 convertible - interior lights

New to all this, so please bear with me being a half-wit! I've just acquired a 27k mile 2003 W209 CLK that has sat in a garage for a while, so lots of odd "lack-of-use" issues that I'm trying to sort. One of them is that the interior lights don't seem to work. Reading lights (push button for each either side of the big "dome" light that also doesn't work whatever the switch position) - along with the little ones above the vanity mirrors, and the door "puddle" lights. Nothing.... Fuse... 2003 W209 320 convertible - interior lights
New to all this, so please bear with me being a half-wit!
I've just acquired a 27k mile 2003 W209 CLK that has sat in a garage for a while, so lots of odd "lack-of-use" issues that I'm trying to sort. One of them is that the interior lights don't seem to work. Reading lights (push button for each either side of the big "dome" light that also doesn't work whatever the switch position) - along with the little ones above the vanity mirrors, and the door "puddle" lights. Nothing.... Fuse...

2003 W209 320 convertible - interior lights

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

I’m looking to buy a 190d

Hell, I'm in the market for a 190d or similar. I'd like an auto but would check out a manual too. Lemme know what you have.
Hell, I'm in the market for a 190d or similar. I'd like an auto but would check out a manual too. Lemme know what you have.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Mercedes w124 radio antenna breack

Doeas anyone knows why each time i put a new aftermarket radio antenna is breaking the white cable from the metal?
Doeas anyone knows why each time i put a new aftermarket radio antenna is breaking the white cable from the metal?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

OM602 Timing

Hello everyone, it's been a while since my last posts but I'm happy to say the 602 rebuild is coming along (mostly) well. I was able to save the crankshaft and find oversize bearings. I now have the head, camshaft, and injector pump on but now I'm stumped on how to time it. My main concern is what position the injector pump is in. If I remember correctly it has to be 14 degrees? But I didn't mark it when I took it off (I know I should have now but I didn't realize that when I took it off... OM602 Timing
Hello everyone, it's been a while since my last posts but I'm happy to say the 602 rebuild is coming along (mostly) well. I was able to save the crankshaft and find oversize bearings.

I now have the head, camshaft, and injector pump on but now I'm stumped on how to time it. My main concern is what position the injector pump is in. If I remember correctly it has to be 14 degrees? But I didn't mark it when I took it off (I know I should have now but I didn't realize that when I took it off...

OM602 Timing

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Strongly considering buying a 1976 mercedes benz 300d diesel

With 175k miles for $950. Too good to be true? What should I look for before pulling the trigger? The reason I believe this price is so low is due to the bad paint on the car. You can tell it has been in the sun a lot to give you an idea of what it looks like. I need this car to get me to and from work (20 miles). It seems like a good deal and I am going to take a look at it tomorrow. The owner claims he drove it all last winter without a problem. What should I look for in terms of deal... Strongly considering buying a 1976 mercedes benz 300d diesel
With 175k miles for $950. Too good to be true? What should I look for before pulling the trigger?
The reason I believe this price is so low is due to the bad paint on the car. You can tell it has been in the sun a lot to give you an idea of what it looks like. I need this car to get me to and from work (20 miles). It seems like a good deal and I am going to take a look at it tomorrow. The owner claims he drove it all last winter without a problem. What should I look for in terms of deal...

Strongly considering buying a 1976 mercedes benz 300d diesel

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Mono valve

I was testing my mono valve to see if I had current. I did. Then I accidentally touched both leads together and I seen a little spark now no current. Is there a fuse somewhere if so where or something else I might have done?
I was testing my mono valve to see if I had current. I did. Then I accidentally touched both leads together and I seen a little spark now no current. Is there a fuse somewhere if so where or something else I might have done?


---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

suspension "clunking"

I have a 2015 E350 4Matic Wagon and recently I have noticed a subtle clunking that seems to be in the front suspension. The car currently has about 107,000 miles on it and I replaced the sway bar links on the front with Delphi replacement parts at about 99,000 miles. What is the procedure for checking to see if these need to be relpaced on the front or rear? Thanks!
I have a 2015 E350 4Matic Wagon and recently I have noticed a subtle clunking that seems to be in the front suspension. The car currently has about 107,000 miles on it and I replaced the sway bar links on the front with Delphi replacement parts at about 99,000 miles. What is the procedure for checking to see if these need to be relpaced on the front or rear?

Thanks!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

2008 mercedes benz s63 amg car only starts in neutral

Hello i just got this 2008 w221 s63 amg and the car only starts in neutral and sometimes you have to take the key in and out a couple of times to get it to start in neutral it does nothing when u try to start in park please help the guy i bought from believes its a computer in the trans but im not sure which computer/part or if thats even the problem at all please help also my two passenger side windows dont work.
Hello i just got this 2008 w221 s63 amg and the car only starts in neutral and sometimes you have to take the key in and out a couple of times to get it to start in neutral it does nothing when u try to start in park please help the guy i bought from believes its a computer in the trans but im not sure which computer/part or if thats even the problem at all please help also my two passenger side windows dont work.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

For those in Europe: W204 C63 AMG in red and estate.

I'm in Canada and this has been my dream car. We have a 15 year rule so can import this very soon. I'm specifically looking for this in red. How hard is it to find and where should I look? I've been lurking in mobile.de but nothing in red has come up. Any tips would be helpful!
I'm in Canada and this has been my dream car. We have a 15 year rule so can import this very soon. I'm specifically looking for this in red. How hard is it to find and where should I look?

I've been lurking in mobile.de but nothing in red has come up.

Any tips would be helpful!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Hi!

Hi guys, Graham from the U.K. here, new member 🙂
Hi guys, Graham from the U.K. here, new member 🙂

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Rear axle noise

Hello, I wonder if anyone may comment on this. First off, this is an overview of the car. W123, manufactured 1985 in Thailand. 3.69 diff. Toyota 1jz vvti and matching autobox. A 3.92 diff would be better. Rear suspension has rubber collars with 4 bumps, I think the rear is too high. I have new 2 bump ones i hope to get fitted Here goes. I normally drive around Bangkok, short journeys (10km each way) to the park and back. Last weekend I drove to Ayutthaya, it's 75km each way. Once near to... Rear axle noise
Hello, I wonder if anyone may comment on this.

First off, this is an overview of the car.
W123, manufactured 1985 in Thailand.
3.69 diff. Toyota 1jz vvti and matching autobox. A 3.92 diff would be better.
Rear suspension has rubber collars with 4 bumps, I think the rear is too high. I have new 2 bump ones i hope to get fitted

Here goes.
I normally drive around Bangkok, short journeys (10km each way) to the park and back. Last weekend I drove to Ayutthaya, it's 75km each way. Once near to...

Rear axle noise

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

W204 2008 Command Controller not working at all. - Not usual shaft fault…

Hi guys, hope you can help. I have a 2008 w204, and the command controller has stopped working completely, not just the scroll function, basically it's dead! is There a fuse that supports the controller, or would it be best to remove and fit another one. many thanks. Graham.
Hi guys, hope you can help. I have a 2008 w204, and the command controller has stopped working completely, not just the scroll function, basically it's dead! is There a fuse that supports the controller, or would it be best to remove and fit another one. many thanks. Graham.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Injection Nozzle Mercedes R107

Hi I have a defect Injection Nozzle on my Mercedes 350SL (California import with 450SL engine) (R107) from 1972. Car no. 10.704.412.003.361. I am not 100% sure on what part number the Nozzle has and i can not find any dealers how have it on stock, that send to Denmark I have found a Mercedes part no: 000 078 34 23 and have several options of Bosch numbers Bosch nr 0 280 150 024 Bosch nr 0 280 150 034 Bosch nr 0 280 150 036 Can any one help please? br Ole Koch
Hi
I have a defect Injection Nozzle on my Mercedes 350SL (California import with 450SL engine) (R107) from 1972.
Car no. 10.704.412.003.361.
I am not 100% sure on what part number the Nozzle has and i can not find any dealers how have it on stock, that send to Denmark

I have found a Mercedes part no: 000 078 34 23 and have several options of Bosch numbers
Bosch nr 0 280 150 024
Bosch nr 0 280 150 034
Bosch nr 0 280 150 036

Can any one help please?

br Ole Koch

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Temperature is not constant

Hello everyone, few weeks ago I bought CLS 350 CDI year 2011, when I drive it on highway with 1500 rpm the temperature decreasing between 70 and 80 degrees, when riding on higher rpm increases to 90 and if I depress the gas pedal it goes back to lower temperature. Does anyone have issues like this or it's normal? Please, any suggestions will be helpfully.
Hello everyone, few weeks ago I bought CLS 350 CDI year 2011, when I drive it on highway with 1500 rpm the temperature decreasing between 70 and 80 degrees, when riding on higher rpm increases to 90 and if I depress the gas pedal it goes back to lower temperature. Does anyone have issues like this or it's normal? Please, any suggestions will be helpfully.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

638 Short Beam Dashboard indicator

Hello, I am the new Vito 638 owner, 2003 Vito Marco Polo, My question is about the short beam dashboard indicator, My Vito doesn't have any short beam light on the dashboard so when I light on my short beams they work but I don't see any indicator on the dashboard, When I light on the Long beams I can see the blue indicator. Any suggestion or idea? thanks a lot
Hello,
I am the new Vito 638 owner, 2003 Vito Marco Polo,

My question is about the short beam dashboard indicator, My Vito doesn't have any short beam light on the dashboard so when I light on my short beams they work but I don't see any indicator on the dashboard, When I light on the Long beams I can see the blue indicator.

Any suggestion or idea?

thanks a lot

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Distributor shaft o ring oil leak W123 200 M115

Hi hope all is well I have an oil leak when driving from the base of the distributor I changed the o ring last year but have been told the shaft doesn't actually need an o ring Any ideas of clarification link to picture of where it's leaking 395A0E9E 82C7 4B43 A080 B5F06B13FC5D Image 395A0E9E 82C7 4B43 A080 B5F06B13FC5D hosted in Freeimage.host freeimage.host
Hi hope all is well
I have an oil leak when driving from the base of the distributor I changed the o ring last year but have been told the shaft doesn't actually need an o ring
Any ideas of clarification


link to picture of where it's leaking

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Parts available from 2008 Mercedes-Benz SLK350

Hello BenzWorld! We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts. We want to be the solution for your Mercedes needs. Please feel free to reach out if you have any questions. Let us know what parts you need or message us for part fitment assistance. AutoHub Shop 3131 Sankey Rd #28 Pleasant Grove, CA 95668 (916) 759-7316 Mon-Fri 9AM-5PM PST ...​ Parts available from 2008 Mercedes-Benz SLK350

Hello BenzWorld!

We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts.
We want to be the solution for your Mercedes needs.
Please feel free to reach out if you have any questions.
Let us know what parts you need or message us for part fitment assistance.

AutoHub Shop
3131 Sankey Rd #28
Pleasant Grove, CA 95668
(916) 759-7316

Mon-Fri 9AM-5PM PST
...​

Parts available from 2008 Mercedes-Benz SLK350

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Parts available from 2006 Mercedes-Benz SLK280

Hello BenzWorld! We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts. We want to be the solution for your Mercedes needs. Please feel free to reach out if you have any questions. Let us know what parts you need or message us for part fitment assistance. AutoHub Shop 3131 Sankey Rd #28 Pleasant Grove, CA 95668 (916) 759-7316 Mon-Fri 9AM-5PM PST ...​ Parts available from 2006 Mercedes-Benz SLK280

Hello BenzWorld!

We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts.
We want to be the solution for your Mercedes needs.
Please feel free to reach out if you have any questions.
Let us know what parts you need or message us for part fitment assistance.

AutoHub Shop
3131 Sankey Rd #28
Pleasant Grove, CA 95668
(916) 759-7316

Mon-Fri 9AM-5PM PST
...​

Parts available from 2006 Mercedes-Benz SLK280

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW

Parts available from 2007 Mercedes-Benz CLS550

Hello BenzWorld! We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts. We want to be the solution for your Mercedes needs. Please feel free to reach out if you have any questions. Let us know what parts you need or message us for part fitment assistance. AutoHub Shop 3131 Sankey Rd #28 Pleasant Grove, CA 95668 (916) 759-7316 Mon-Fri 9AM-5PM PST ...​ Parts available from 2007 Mercedes-Benz CLS550

Hello BenzWorld!

We are AutoHub. Located in Sacramento, CA, we specialize in high-quality used Mercedes parts.
We want to be the solution for your Mercedes needs.
Please feel free to reach out if you have any questions.
Let us know what parts you need or message us for part fitment assistance.

AutoHub Shop
3131 Sankey Rd #28
Pleasant Grove, CA 95668
(916) 759-7316

Mon-Fri 9AM-5PM PST
...​

Parts available from 2007 Mercedes-Benz CLS550

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zpr.io/t5iAW