Monday, July 31, 2023

Strange intermittent starting problem...beyond the obvious faulty battery

This X204 just recently started having failed starts that first appeared as obvious battery failure. Had battery tested with two separate load testers at auto stores after full charge. There had been no sign at all of premature battery discharge and charging V is right at 13.8V. The symptom is as follows: Car turns over but started ceases to crank suddenly before engine fires up...all the signs of a loose connection after the battery was ruled out. Found a loose + battery connection on the... Strange intermittent starting problem...beyond the obvious faulty battery
This X204 just recently started having failed starts that first appeared as obvious battery failure. Had battery tested with two separate load testers at auto stores after full charge. There had been no sign at all of premature battery discharge and charging V is right at 13.8V. The symptom is as follows:
Car turns over but started ceases to crank suddenly before engine fires up...all the signs of a loose connection after the battery was ruled out. Found a loose + battery connection on the...

Strange intermittent starting problem...beyond the obvious faulty battery

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Tires for E350 Sport Package

I have the 18" AMG Sport Package wheels on my 2009 E350 and had new tires put on the rear. They put on 235/30/R18. I noticed they didn't look right, and remembered that I had bigger tires on the rear. Pretty sure I had 275/35/R18 on the rear, and really liked the ride as well as how they looked. Is the 275/35 the biggest tires I can put on the rear wheels?
I have the 18" AMG Sport Package wheels on my 2009 E350 and had new tires put on the rear.
They put on 235/30/R18.

I noticed they didn't look right, and remembered that I had bigger tires on the rear.
Pretty sure I had 275/35/R18 on the rear, and really liked the ride as well as how they looked.

Is the 275/35 the biggest tires I can put on the rear wheels?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Climate Control Vacuum - not the usual "no center vents"

I've searched it to death, and hope that this warrants a new thread. I have a '99 SL500 with some incredibly strange vacuum issues with the climate control system. For a couple of years my car has had climate vacuum issues, when I first bought it the left-side vent would not open or close (always stuck closed, which is strange because this requires vacuum pressure). Over time I lost my center vents, but they come and go as I drive - but not with any regard for acceleration. I replaced my... Climate Control Vacuum - not the usual "no center vents"
I've searched it to death, and hope that this warrants a new thread. I have a '99 SL500 with some incredibly strange vacuum issues with the climate control system.

For a couple of years my car has had climate vacuum issues, when I first bought it the left-side vent would not open or close (always stuck closed, which is strange because this requires vacuum pressure). Over time I lost my center vents, but they come and go as I drive - but not with any regard for acceleration.

I replaced my...

Climate Control Vacuum - not the usual "no center vents"

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Emergency Tire Jack compatibility

I found an emergency tire jack on a local Craigslist page for $40 (Canadian, which is like $30 USD) and want it since my car does not have the original. I have a 1985 380 SL. The jack is from a 1984 300TD stamped 123 583 02 15 Bilstein. I've tried to research this but can't seem to find if the jack will work my my 380 (it's in the shop this week so I can't drive it there). Anyone know if this should fit? Here's a photo from the ad. Thanks!
I found an emergency tire jack on a local Craigslist page for $40 (Canadian, which is like $30 USD) and want it since my car does not have the original.

I have a 1985 380 SL. The jack is from a 1984 300TD stamped 123 583 02 15 Bilstein.

I've tried to research this but can't seem to find if the jack will work my my 380 (it's in the shop this week so I can't drive it there).

Anyone know if this should fit?

Here's a photo from the ad.

Thanks!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Emergency Tire Jack compatibilty

I found an emergency tire jack on a local Craigslist page for $40 (Canadian, which is like $30 USD) and want it since my car does not have the original. I have a 1985 380 SL. The jack is from a 1984 300TD. I've tried to research this but can't seem to find if the jack will work my my 380 (it's in the shop this week so I can't drive it there). Anyone know if this should fit? Here's a photo from the ad (I'm not taking the wheel) and it's part # 1075830115 from what I can find on the web. I... Emergency Tire Jack compatibilty
I found an emergency tire jack on a local Craigslist page for $40 (Canadian, which is like $30 USD) and want it since my car does not have the original.

I have a 1985 380 SL. The jack is from a 1984 300TD. I've tried to research this but can't seem to find if the jack will work my my 380 (it's in the shop this week so I can't drive it there).

Anyone know if this should fit?

Here's a photo from the ad (I'm not taking the wheel) and it's part # 1075830115 from what I can find on the web. I...

Emergency Tire Jack compatibilty

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Neil

CLK200 ROOF STUCK HALF WAY. Mercedes has had he car for a few days and are having issue on what it could be, all codes are ok and no faults, thought it was the pump but not sure now. Neil
CLK200 ROOF STUCK HALF WAY.
Mercedes has had he car for a few days and are having issue on what it could be, all codes are ok and no faults, thought it was the pump but not sure now.
Neil

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Do I need a water pump?

My air conditioner stopped working, so I got that fixed, then my car started overheating. So when the engine goes over 190 I turn off A/C and open windows, and that usually helps. Today it didn't help, and the car overheated. I tried the trick of turning on the heater, but NO HEAT CAME OUT! I was all set to flush the system and replace the coolant tomorrow, but now I'm wondering if I should replace the water pump while I'm at it. Advice?
My air conditioner stopped working, so I got that fixed, then my car started overheating. So when the engine goes over 190 I turn off A/C and open windows, and that usually helps. Today it didn't help, and the car overheated. I tried the trick of turning on the heater, but NO HEAT CAME OUT! I was all set to flush the system and replace the coolant tomorrow, but now I'm wondering if I should replace the water pump while I'm at it. Advice?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Dead Radio

2003 SL55 AMG ...I recieved this message yesterday, took the car for a ride and cleared error message. Now my radio has no power .I am wondering if i blew a fuse? Where should i be looking for fuses that power the radio?
2003 SL55 AMG ...I recieved this message yesterday, took the car for a ride and cleared error message. Now my radio has no power .I am wondering if i blew a fuse? Where should i be looking for fuses that power the radio?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

95 wagon, still looking good

333k miles...just ordered paint for the front fender. Local paint store ordered mixed wrong color a few years ago and its bugged me ever since
333k miles...just ordered paint for the front fender. Local paint store ordered mixed wrong color a few years ago and its bugged me ever since

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

1995 SL600 ABS Wheel Speed Sensor Replacement/Substitute

Hello, After looking for OEM ABS Wheel Speed Sensors (129-540-29-17-64 & 129-540-30-17) that are compatible with the 1995 SL600, I have had zero luck. I was wondering if anyone might know of good replacements or equivalent that I could use in my vehicle.
Hello,

After looking for OEM ABS Wheel Speed Sensors (129-540-29-17-64 & 129-540-30-17) that are compatible with the 1995 SL600, I have had zero luck.

I was wondering if anyone might know of good replacements or equivalent that I could use in my vehicle.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Did my second oil change since owning the car, intermittent knocking noise right after starting up car after oil change.

I replaced the oil filter, I emptied the oil from the drain plug and I put everything back and torqued up the plug and filter and added 8 qts of oil, the same 5w40 as usual (Redline). The min/max stick is at halfway and I waited 10 minutes then started the car. Oil pressure reads "3" but engine makes intermittent knocking sound about 15 knocks then silence for a few seconds then knocking again. Mileage is 120,000kms and engine had full prior service history. What's going on?
I replaced the oil filter, I emptied the oil from the drain plug and I put everything back and torqued up the plug and filter and added 8 qts of oil, the same 5w40 as usual (Redline). The min/max stick is at halfway and I waited 10 minutes then started the car. Oil pressure reads "3" but engine makes intermittent knocking sound about 15 knocks then silence for a few seconds then knocking again. Mileage is 120,000kms and engine had full prior service history.

What's going on?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Replacing 3rd brake light in trunk lid

I am trying to replace the 3rd brake light in the trunk lid of my 2002 CLK55 AMG. The original one is dry rotted and faded. I was able to remove the original one (it broke apart in the process), but I am not able to get the new lens to snap into the housing. It has like 5 or 6 sets of finger clips the squeeze together when you push them in but once you get them in far enough, they spread back open and lock the lens to the light base. The problem I am having is the seal that came affixed to... Replacing 3rd brake light in trunk lid
I am trying to replace the 3rd brake light in the trunk lid of my 2002 CLK55 AMG. The original one is dry rotted and faded. I was able to remove the original one (it broke apart in the process), but I am not able to get the new lens to snap into the housing. It has like 5 or 6 sets of finger clips the squeeze together when you push them in but once you get them in far enough, they spread back open and lock the lens to the light base. The problem I am having is the seal that came affixed to...

Replacing 3rd brake light in trunk lid

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New member in NC

Hello all. My name is Brian, I am in Mebane NC. My 1980 416 doka rolled off the truck today from Washington. Sorting through some issues and came across this wonderful site. Anybody in the region with experience or know a shop that has interest and experience with these trucks? My air pressure warning light stays illuminated though it looks like I am keeping about 7.5 bar. Brake fluid reservoirs are full. thanks for any assistance and look forward to more time on this forum Brian
Hello all. My name is Brian, I am in Mebane NC.
My 1980 416 doka rolled off the truck today from Washington. Sorting through some issues and came across this wonderful site. Anybody in the region with experience or know a shop that has interest and experience with these trucks?
My air pressure warning light stays illuminated though it looks like I am keeping about 7.5 bar. Brake fluid reservoirs are full.
thanks for any assistance and look forward to more time on this forum
Brian

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Brake Booster and Brake Master Cylinder & Brake Line Torque Values

Replaced all of these items. Anyone have the values for these.
Replaced all of these items.

Anyone have the values for these.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Front Bumper - Replacement Help!

Hi - I have a 2002 SL500 and unfortunately bracket the bottom of my front bumper badly that it cannot be repaired. I can't find a replacement anywhere. All I see are duraflex bumpers online and warnings that they are terrible. Is that true? Anyone here used a duraflex bumper that is happy with the finished product? I have a good body shop willing to try and make it work, but I'm concerned it'll look terrible. Any thoughts or advice someone can offer?
Hi - I have a 2002 SL500 and unfortunately bracket the bottom of my front bumper badly that it cannot be repaired. I can't find a replacement anywhere. All I see are duraflex bumpers online and warnings that they are terrible.
Is that true? Anyone here used a duraflex bumper that is happy with the finished product? I have a good body shop willing to try and make it work, but I'm concerned it'll look terrible.
Any thoughts or advice someone can offer?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

C 216 frame/ structural measurements

Hello, I am looking for the factory structural measurements for this chassis. I have a car that needs to go through a structural safety and I am required to have the exact factory numbers to reference our current measurements. No Mercedes dealer will give it to me or they say they don't have it and then when they send me to the certified Mercedes shop those guys say they don't have it because it's in a digital file so they don't know how to give me the numbers. Surely there's a way to get... C 216 frame/ structural measurements
Hello, I am looking for the factory structural measurements for this chassis. I have a car that needs to go through a structural safety and I am required to have the exact factory numbers to reference our current measurements. No Mercedes dealer will give it to me or they say they don't have it and then when they send me to the certified Mercedes shop those guys say they don't have it because it's in a digital file so they don't know how to give me the numbers. Surely there's a way to get...

C 216 frame/ structural measurements

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

hello from spain basque country

No tengo un Mercedes como tal. mi coche es un smart forfour pero me encanta el mundo de los coches y aprender
No tengo un Mercedes como tal. mi coche es un smart forfour pero me encanta el mundo de los coches y aprender

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Readiness Smog Testing Monitors Not Re-setting Wont Re-set

1996 S500 Sedan V8 Need help / advice on getting these monitors to reset so as to get the car smogged. I've been driving the car but they still are red light (see picture). How do I get them to reset? Attachments
1996 S500 Sedan V8

Need help / advice on getting these monitors to reset so as to get the car smogged. I've been driving the car but they still are red light (see picture). How do I get them to reset?


Attachments

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

How to test interior mirror functions?

I suspect that a couple of Homelink buttons on my [interior] mirror aren't working: one button, the first works- pressing it results in the transmit LED lighting up; this does not happen when pressing the other two buttons (from left to right they'd be the 2nd and 3rd buttons). I have a spare mirror and would like to test it before I go about doing a swap. Does anyone have any guidance on testing this mirror, wiring diagram perhaps (thinking I just need to supply power and ground)? I've... How to test interior mirror functions?
I suspect that a couple of Homelink buttons on my [interior] mirror aren't working: one button, the first works- pressing it results in the transmit LED lighting up; this does not happen when pressing the other two buttons (from left to right they'd be the 2nd and 3rd buttons). I have a spare mirror and would like to test it before I go about doing a swap. Does anyone have any guidance on testing this mirror, wiring diagram perhaps (thinking I just need to supply power and ground)?

I've...

How to test interior mirror functions?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

R107 fuel filter

I just received fuel filters from Bosch ( 450905177)and Mahle (K38) which are too large to fit the bracket in my 280sl euro. The old filter has no discernable numbers on it but is 4.25" tall and 3" diameter. Does anyone know the correct part number to fit my bracket?
I just received fuel filters from Bosch ( 450905177)and Mahle (K38) which are too large to fit the bracket in my 280sl euro. The old filter has no discernable numbers on it but is 4.25" tall and 3" diameter.
Does anyone know the correct part number to fit my bracket?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Right front inner Constant Velocity (CV) Joint Boot

I've been bothered recently a bit from a slight chirping at start up from my serpentine belt (goes away after about a minute of driving despite the battery being fully charged up and relatively new). As a result of that, I took it to my local mechanic to consider replacing the serpentine belt which is $40 CAD all in at Parts Source, part 4050695, manufactured by Continental). In the end the belt was not replaced at this time as the belt appeared fine and things were cleaned up a bit. I... Right front inner Constant Velocity (CV) Joint Boot
I've been bothered recently a bit from a slight chirping at start up from my serpentine belt (goes away after about a minute of driving despite the battery being fully charged up and relatively new). As a result of that, I took it to my local mechanic to consider replacing the serpentine belt which is $40 CAD all in at Parts Source, part 4050695, manufactured by Continental). In the end the belt was not replaced at this time as the belt appeared fine and things were cleaned up a bit. I...

Right front inner Constant Velocity (CV) Joint Boot

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

I/M Readiness Smog Testing Monitors Not Re-setting Wont Re-set

1996 S500 Sedan V8 Need help / advice on getting these monitors to reset so as to get the car smogged. I've been driving the car but they still are red light (see picture). How do I get them to reset?
1996 S500 Sedan V8

Need help / advice on getting these monitors to reset so as to get the car smogged. I've been driving the car but they still are red light (see picture). How do I get them to reset?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Hello from Orlando

I'm the proud owner of a 2007 sl550 in near showroom condition with 47 k miles. I also look forward to meeting folks with a similar vehicle to trade tips with.. -cheers Wayne
I'm the proud owner of a 2007 sl550 in near showroom condition with 47 k miles.
I also look forward to meeting folks with a similar vehicle to trade tips with..
-cheers
Wayne

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Rear SAM Replacement - Did I purchase correct replacement for 2009 ML 350?

My VIN: 4JGBB86E09A513286 Current Part: Delphi SAM REAR ZB: A 164 900 43 00 HW: A 164 545 78 16 SW: A 164 902 03 00, Delphi Part no: 28193966, HW 27/08, SW 34/08, SNO: 0091, DOP: 064/09 Replacement/Purchased Part: Delphi SAM REAR ZB: A 164 900 47 00 HW: A 164 545 82 16 SW: A 164 902 03 00, Delphi Part no: 28193980, HW 27/08, SW 34/08, SNO: 0006, DOP: 091/09 Did I purchase the correct part, and will it require recoding with STAR? Thank you for all your help and support, appreciate it.
My VIN:

4JGBB86E09A513286

Current Part:
Delphi SAM REAR
ZB: A 164 900 43 00
HW: A 164 545 78 16
SW: A 164 902 03 00, Delphi Part no: 28193966, HW 27/08, SW 34/08, SNO: 0091, DOP: 064/09

Replacement/Purchased Part:
Delphi SAM REAR
ZB: A 164 900 47 00
HW: A 164 545 82 16
SW: A 164 902 03 00, Delphi Part no: 28193980, HW 27/08, SW 34/08, SNO: 0006, DOP: 091/09

Did I purchase the correct part, and will it require recoding with STAR?

Thank you for all your help and support, appreciate it.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New member intro

Been asked to introduce myself. Luke here. I know absolutely stuff all about cars but I love learning and asking questions, so I will apologise in advance! Lol.
Been asked to introduce myself. Luke here. I know absolutely stuff all about cars but I love learning and asking questions, so I will apologise in advance! Lol.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2006 C220 CDI no-crank, no start

A neighbour has asked me to look at his 2006 C220. When you turn the key to the crank position nothing happens. I scanned the car for fault codes and I was able to clear most of them aside from the SRS (airbag) and somehting else (can't remember exactly). I got some live data for the starter motor and there was nothing from terminal 50. Is that what energizes the solenoid on the starter motor? I'm suspecting either a broken/loose connection or the starter motor itself. I'm not gonna load up... 2006 C220 CDI no-crank, no start
A neighbour has asked me to look at his 2006 C220. When you turn the key to the crank position nothing happens. I scanned the car for fault codes and I was able to clear most of them aside from the SRS (airbag) and somehting else (can't remember exactly). I got some live data for the starter motor and there was nothing from terminal 50. Is that what energizes the solenoid on the starter motor? I'm suspecting either a broken/loose connection or the starter motor itself. I'm not gonna load up...

2006 C220 CDI no-crank, no start

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Electrical issues.

Hello, I recently bougth a c300 2009 6-speed. I love the car so far but my key isnt locking or unlocking the drivers door, wipers arent working, blinkers are working( the emergency ligths does work, so its not the bulb.) Ac and drivers window goes down on ita own. I tried plugging the computer to the OBD port and its not working. Its has power but it says no signal. I already tried with several diagnostic tools even the computer. I need to fix the obd to be able to fix the other things. If... Electrical issues.
Hello, I recently bougth a c300 2009 6-speed. I love the car so far but my key isnt locking or unlocking the drivers door, wipers arent working, blinkers are working( the emergency ligths does work, so its not the bulb.) Ac and drivers window goes down on ita own. I tried plugging the computer to the OBD port and its not working. Its has power but it says no signal. I already tried with several diagnostic tools even the computer. I need to fix the obd to be able to fix the other things. If...

Electrical issues.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Original Becker Radios

I've been doing some research about the available Becker radios for the W124 in the early 1990's and have found that most of the Becker Europa, Grand Prix and Mexico 2000 series radios are 2 channel radios, usually identified as "2 x 20W" by an orange sticker on the top side of the unit (as shown in the picture below). I'm not an audio, electronics or radio expert by any means, but doesn't this mean it will only produce sound out of 2 speakers?
I've been doing some research about the available Becker radios for the W124 in the early 1990's and have found that most of the Becker Europa, Grand Prix and Mexico 2000 series radios are 2 channel radios, usually identified as "2 x 20W" by an orange sticker on the top side of the unit (as shown in the picture below). I'm not an audio, electronics or radio expert by any means, but doesn't this mean it will only produce sound out of 2 speakers?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New to the forum

Hi to all New on this forum, hoping to exchange views and help with like minded people. I have an SL320 R129 - 1977. She's in good nic for the year, just had the engine bay cleaned and it has come up pretty good.
Hi to all

New on this forum, hoping to exchange views and help with like minded people.
I have an SL320 R129 - 1977.
She's in good nic for the year, just had the engine bay cleaned and it has come up pretty good.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

N30/4 ESP issues?

car: 2011 C300 milage: 106k Hello all! =0) I recently got a computer software update and camshaft magnets replaced, but not long afterwards I received a EBR, ABS, ESP warning. I parked it and let it be in my garage to deal with at a later date. So I took it to Autozone and got the following read out- and The person at AZ said it seemed to be more a software issue... N30/4 ESP issues?
car: 2011 C300
milage: 106k


Hello all! =0)

I recently got a computer software update and camshaft magnets replaced, but not long afterwards I received a EBR, ABS, ESP warning. I parked it and let it be in my garage to deal with at a later date. So I took it to Autozone and got the following read out-


and



The person at AZ said it seemed to be more a software issue...

N30/4 ESP issues?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

speedometer white plastic cover screws missing

I noticed while preparing to fix the odometer that my white plastic case is not held on to the gauge by any screws (must have been previously removed and not replaced) can anyone tell me the size of those screws so i can correct the situation thanks
I noticed while preparing to fix the odometer that my white plastic case is not held on to the gauge by any screws (must have been previously removed and not replaced) can anyone tell me the size of those screws so i can correct the situation

thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

MSRP Discounts in 2023?

Ordered a new 24 GLS-450 which will arrive next month. Curious what folks' are seeing with discounts off of MSRP. My Porsche dealer usually offers 4% - what do you guys and gals see?
Ordered a new 24 GLS-450 which will arrive next month. Curious what folks' are seeing with discounts off of MSRP. My Porsche dealer usually offers 4% - what do you guys and gals see?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Slightly off topic

You're just pretending to work so have 17 and a half minutes of the 600. but they're wrong, we all know the SL is the best car ever made.
You're just pretending to work so have 17 and a half minutes of the 600.


but they're wrong, we all know the SL is the best car ever made.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W216 CL550 Air Suspension

Hello everyone, As if I didn't have enough projects, I decided to go ahead and buy another one. And because I love the phrase "the most expensive car you can buy is a cheap Mercedes", I bought myself a cheap CL550. The car apparently drove into a snowbank and damaged the air suspension compressor. But when I opened the hood and took a look at the air lines going into the front struts, I saw what looks like Slime tire sealant in the strut wells and also some in one of the air tubes. This... W216 CL550 Air Suspension
Hello everyone,

As if I didn't have enough projects, I decided to go ahead and buy another one. And because I love the phrase "the most expensive car you can buy is a cheap Mercedes", I bought myself a cheap CL550.

The car apparently drove into a snowbank and damaged the air suspension compressor. But when I opened the hood and took a look at the air lines going into the front struts, I saw what looks like Slime tire sealant in the strut wells and also some in one of the air tubes. This...

W216 CL550 Air Suspension

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

WHERE do these go? Someone? anyone? R107 1982 380SL

Good day forum folx. I just had my engine bay cleaned and when I looked it over, these 2 pieces were detached. Can anyone help please? I really don't feel like paying 120 for a mechanic... Picture 1: The front grille Picture 2: Engine Bay left side Thanks so much - kerry
Good day forum folx. I just had my engine bay cleaned and when I looked it over, these 2 pieces were detached. Can anyone help please? I really don't feel like paying 120 for a mechanic...
Picture 1: The front grille
Picture 2: Engine Bay left side

















Thanks so
much -
kerry

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Visor Replacement

So I'm going through some of the parts that came with my 1973 R107 (450sl) and noticed that the after market visors have absolutely no slot holes in them where the rods would be inserted. Anyone else run into this?
So I'm going through some of the parts that came with my 1973 R107 (450sl) and noticed that the after market visors have absolutely no slot holes in them where the rods would be inserted.

Anyone else run into this?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Replacing front air springs/struts

Do you change the entire unit or just air springs on the front? Approximately 120k miles.
Do you change the entire unit or just air springs on the front? Approximately 120k miles.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W212 E Class Roof Rack Base System

Roof rack cross rails for 2010-2016 E Class sedan and wagon. Only used a few times. Sold our car so no longer need it. Part number 212 890 04 93 Prefer local meet up in DFW. I don't have a box large enough to ship but I'll try to find one.
Roof rack cross rails for 2010-2016 E Class sedan and wagon. Only used a few times. Sold our car so no longer need it.
Part number 212 890 04 93
Prefer local meet up in DFW. I don't have a box large enough to ship but I'll try to find one.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New guy looking for some guidance

Hey all, I am currently looking at the used market for a C300 or C350 and am hoping for a bit of guidance on what to look out for when buying a W204. I picked the W204 as it seems to be within my price range and they look like nice vehicles. I am hoping to have a look at one tonight. Here are three options I'm currently interested in, I'd appreciate any insight on price as well, as I believe most vehicles are priced WAY too high right now.... This first one looks quite appealing as it is... New guy looking for some guidance
Hey all,

I am currently looking at the used market for a C300 or C350 and am hoping for a bit of guidance on what to look out for when buying a W204. I picked the W204 as it seems to be within my price range and they look like nice vehicles. I am hoping to have a look at one tonight.
Here are three options I'm currently interested in, I'd appreciate any insight on price as well, as I believe most vehicles are priced WAY too high right now....

This first one looks quite appealing as it is...

New guy looking for some guidance

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

ISO reputable provider of emulators for ESL.

Looking to pre-emptively change out the ESL with an emulator on my 2014 C300. Seeing prices all over the board on ebay. Anyone have contact info or can vouch for good service with someone you worked with?
Looking to pre-emptively change out the ESL with an emulator on my 2014 C300. Seeing prices all over the board on ebay. Anyone have contact info or can vouch for good service with someone you worked with?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Sensor light on rearview mirror?

Rashman said: lol! Relaxed.... in an AMG. LOL! These things are mentalists!!! 👍 Click to expand... Well I just bought a gla250 and was driving accross the Bay Bridge 7/23 and that amber light INSIDE the driver's rear view mirror came on. It is not the ambient lights under the mirror as most respoders here have mistaken. It is inside the mirror at the bottom of the glass surface. I have no idea what it is for. SF Tom
lol!


Relaxed.... in an AMG.

LOL!


These things are mentalists!!!

:eek:👍
Well I just bought a gla250 and was driving accross the Bay Bridge 7/23 and that amber light INSIDE the driver's rear view mirror came on.

It is not the ambient lights under the mirror as most respoders here have mistaken. It is inside the mirror at the bottom of the glass surface.

I have no idea what it is for.

SF Tom

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Mercedes W202 C220 Elegance - Looking for 16x7,5 (aftermarket) rims, any idea's?

Hello Benzworld, A few months ago I created a thread asking about the fitment of 17x8J ET28 rims. With help of forum contributor Khomer2, I came to the conclusion that I need rims to be max 7.5" wide with and ET in the range of 35-41mm for a square (stock) setup. This lead me down a road of searching for the right rims. Nothing to fancy/flashy and somewhat period correct. As you might expect, I have not found any rims yet. However, I did figure out that 17 inch rims are to big for my... Mercedes W202 C220 Elegance - Looking for 16x7,5 (aftermarket) rims, any idea's?
Hello Benzworld,

A few months ago I created a thread asking about the fitment of 17x8J ET28 rims. With help of forum contributor Khomer2, I came to the conclusion that I need rims to be max 7.5" wide with and ET in the range of 35-41mm for a square (stock) setup. This lead me down a road of searching for the right rims. Nothing to fancy/flashy and somewhat period correct.

As you might expect, I have not found any rims yet. However, I did figure out that 17 inch rims are to big for my...

Mercedes W202 C220 Elegance - Looking for 16x7,5 (aftermarket) rims, any idea's?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Trunk only open with key

My trunk will not open witth the remote, the push button or from inside the car. All fuses OK. Checked for broken leads from trunk to car. Everything seems to be ok. Good ideas welcome.
My trunk will not open witth the remote, the push button or from inside the car. All fuses OK. Checked for broken leads from trunk to car. Everything seems to be ok.
Good ideas welcome.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Lock System

I have a 1999 ML320. I have had the problem of using fob when I lock car the doors would lock unlock and relock. This has gone on for awhile. If big problem I would use lock button in vehicle to lock and lock drivers door by hand or with key. As of the last couple of days the back door on drivers side will not lock. I cannot lock by hand either. The lock on hatch has not worked for years. What needs to be tested or replaced? Is it something I can do? Thanks
I have a 1999 ML320. I have had the problem of using fob when I lock car the doors would lock unlock and relock. This has gone on for awhile. If big problem I would use lock button in vehicle to lock and lock drivers door by hand or with key. As of the last couple of days the back door on drivers side will not lock. I cannot lock by hand either. The lock on hatch has not worked for years.

What needs to be tested or replaced? Is it something I can do?

Thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

NEED HELP PLEASE

I have a 2003 Mercedes Benz S500 4matic and I currently bought after market headlights but the guy didn't tell me they're NOT HID compatible so I'm wondering can anyone help me out on how to convert HID to Halogen
I have a 2003 Mercedes Benz S500 4matic and I currently bought after market headlights but the guy didn't tell me they're NOT HID compatible so I'm wondering can anyone help me out on how to convert HID to Halogen


---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New to BenzWorld!

Hello everyone. Nice to be hear. I just bought a 2019 GLE 63S (beast). The car is almost brand new with 12,ooo miles currently. A nice, conservative car for an old dude like me! LOL Well anyhow, I'm looking forward to lurking around here to share car stuff.
Hello everyone. Nice to be hear.
I just bought a 2019 GLE 63S (beast). The car is almost brand new with 12,ooo miles currently.
A nice, conservative car for an old dude like me! LOL
Well anyhow, I'm looking forward to lurking around here to share car stuff.
:cool:

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

94 e320

Mint....60000 miles...yes only 60000 miles... brown
Mint....60000 miles...yes only 60000 miles... brown

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

E350 recommendation

Considering an E350, maybe 2006 - 2008 and was wondering about the pros and cons of those model years and overall satisfaction with these models. I have owned older 124 and 140 models, but not the newer E class. Thanks for any thoughts. Harvey
Considering an E350, maybe 2006 - 2008 and was wondering about the pros and cons of those model years and overall satisfaction with these models. I have owned older 124 and 140 models, but not the newer E class.

Thanks for any thoughts.
Harvey

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Sunday, July 30, 2023

How do I disable the factory alarm?

How do I disable the factory alarm? 2000 e320
How do I disable the factory alarm?

2000 e320

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

1997 C280 Passenger Seat Motor Part #?

Hello Benz Heads, Long time lurker. Many thanks to many solid threads that have helps these past years. I'm asking because I lost the main thread regarding Failed Passenger seat moving back and front. I bought a replacement relay only to find out that my relay is "Off white" with 6 normal prongs. The suggested relay I bought is multi prong that are all flat. I cannot for the life of me find my exact Seat Relay online. Also am considering buying a new Middle motor and possibly seat... 1997 C280 Passenger Seat Motor Part #?
Hello Benz Heads, Long time lurker. Many thanks to many solid threads that have helps these past years.

I'm asking because I lost the main thread regarding Failed Passenger seat moving back and front.
I bought a replacement relay only to find out that my relay is "Off white" with 6 normal prongs.
The suggested relay I bought is multi prong that are all flat. I cannot for the life of me find my exact Seat Relay online.

Also am considering buying a new Middle motor and possibly seat...

1997 C280 Passenger Seat Motor Part #?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

CLK 350 (2006) Jolts, High RPM & shift down

Hi guys I have a CLK 350 2006 W209 Coupe I am facing an issue while driving on highways and in city whenever I am driving my car shifts down one or two gears and gives me a high RPM and then shifts back to its normal gear i was driving on i.e I am driving on 6th gear on a highway at 120 km/h suddenly there will be a jolt RPM will go upto 5000 or 6000 taking the gear into 4th or 5th and then shift back into 6th gear. I am not sure what to do and how to solve this issue. Kindly help.
Hi guys

I have a CLK 350 2006 W209 Coupe
I am facing an issue while driving on highways and in city
whenever I am driving my car shifts down one or two gears and gives me a high RPM and then shifts back to its normal gear i was driving on

i.e I am driving on 6th gear on a highway at 120 km/h suddenly there will be a jolt RPM will go upto 5000 or 6000 taking the gear into 4th or 5th and then shift back into 6th gear.


I am not sure what to do and how to solve this issue. Kindly help.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Doing this a bit backwards...this is my second post

Sorry...should have introduced myself first, but I found this forum because I had an issue, which I've posted about in the A209 forum. My name is Toby Johnson, and my wife and I recently purchased a 2005 CLK500 cabriolet with 86k miles. We bought it as an inexpensive convertible to cruise around in, but have really fallen in love with it. Amazing car for the price! I have quite a bit of car experience, particularly in the 12v entertainment arena (audio, video, security) and am a pretty... Doing this a bit backwards...this is my second post
Sorry...should have introduced myself first, but I found this forum because I had an issue, which I've posted about in the A209 forum.

My name is Toby Johnson, and my wife and I recently purchased a 2005 CLK500 cabriolet with 86k miles. We bought it as an inexpensive convertible to cruise around in, but have really fallen in love with it. Amazing car for the price!

I have quite a bit of car experience, particularly in the 12v entertainment arena (audio, video, security) and am a pretty...

Doing this a bit backwards...this is my second post

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2005 CLK500 Cab shifter won't go past neutral from drive...read several older posts, and want to clear up some questions

Hello all, As the subject says, our new to us 2005 CLK500 has developed this behavior: Starts up, goes into reverse, goes into drive without issue. When shifting back to park or reverse, the shifter hits a gate between neutral and reverse. Taking my foot off the brake momentarily 'lifts the gate' and I can shift into reverse or park Turning the key off, also lifts the gate, and allows the shift. Display on the dash shows the proper gear, no malfunction indicated. So far, no issues... 2005 CLK500 Cab shifter won't go past neutral from drive...read several older posts, and want to clear up some questions
Hello all,

As the subject says, our new to us 2005 CLK500 has developed this behavior:

Starts up, goes into reverse, goes into drive without issue. When shifting back to park or reverse, the shifter hits a gate between neutral and reverse. Taking my foot off the brake momentarily 'lifts the gate' and I can shift into reverse or park Turning the key off, also lifts the gate, and allows the shift. Display on the dash shows the proper gear, no malfunction indicated. So far, no issues...

2005 CLK500 Cab shifter won't go past neutral from drive...read several older posts, and want to clear up some questions

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Diesel Filter

We have a 2016 Sprinter 3500 with 3 Liter diesel. Time for a oilchange and wanted to know model and brand to purchase.
We have a 2016 Sprinter 3500 with 3 Liter diesel. Time for a oilchange and wanted to know model and brand to purchase.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Electric seat not working...

HI, My CLK 320 electric seat on the driver side is not functioning, the forward and backward movement is not working but the back rest and the head rest works perfectly. Can someone advice how i can shift my seat backward to the position i preferred for driving? Anyone had similar experince or know what is wrong? Rgds Ray
HI,

My CLK 320 electric seat on the driver side is not functioning, the forward and backward movement is not working but the back rest and the head rest works perfectly. Can someone advice how i can shift my seat backward to the position i preferred for driving?

Anyone had similar experince or know what is wrong?

Rgds
Ray

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

won't shift out of first gear (5 speed sutomatic)

either in full auto or manual mode
either in full auto or manual mode

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Interpreting duty cycle reading

Hi folks After replacing EZL on my 1991 500SL, I am trying to hunt down the high idle in P or N when engine has reached operating temp. Checked throttle switch - continuity & resistance seem good Checked for vacuum leaks. All hoses & connectors in very good order. No change in idle when spraying everywhere with carb cleaner I pulled the connector to ICV (when engine warmed up at 80C). The idle becomes jerky but rpm stay roughly the same, maybe slightly higher Ignition on duty cycle check -... Interpreting duty cycle reading
Hi folks
After replacing EZL on my 1991 500SL, I am trying to hunt down the high idle in P or N when engine has reached operating temp.
Checked throttle switch - continuity & resistance seem good
Checked for vacuum leaks. All hoses & connectors in very good order. No change in idle when spraying everywhere with carb cleaner

I pulled the connector to ICV (when engine warmed up at 80C). The idle becomes jerky but rpm stay roughly the same, maybe slightly higher

Ignition on duty cycle check -...

Interpreting duty cycle reading

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

What is the meaning of "Charge" bar on the fuel consumption screen?

What is the meaning of the "Charge" indicator that is displayed on the fuel consumption screen? It shows a green progress bar when braking like if the battery was being recharged when breaking. That would make sense on an hybrid vehicle but not on the GLS. I did not find anything about this in the owner manual.
What is the meaning of the "Charge" indicator that is displayed on the fuel consumption screen? It shows a green progress bar when braking like if the battery was being recharged when breaking. That would make sense on an hybrid vehicle but not on the GLS. I did not find anything about this in the owner manual.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Airmatic height button no function

First off I been spending days trying to find something similar but all take about leaks and brands so here we go. Main issue: Button to raise vehicle lights up but nothing happens. Compressor doesn't turn on and vehicle does not raise. Both relay and compressor are brand new Arnott. Car at this moment sits slanted with a read for the rear of 115mm and does not move. I did adjust the rear height sensor which could be that it's causing the whole issue? I got no codes and for some reason my... Airmatic height button no function
First off I been spending days trying to find something similar but all take about leaks and brands so here we go.

Main issue: Button to raise vehicle lights up but nothing happens. Compressor doesn't turn on and vehicle does not raise. Both relay and compressor are brand new Arnott. Car at this moment sits slanted with a read for the rear of 115mm and does not move. I did adjust the rear height sensor which could be that it's causing the whole issue? I got no codes and for some reason my...

Airmatic height button no function

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

CLA250 4Matic M270 Timing Chain Tensioner

Does anyone know for the M270 engine after replacing its Timing Chain Tensioner 270-052-14-00 if there is any further step that has to be done to facilitate the tensioner to unlock/release. I know some other models have to be clocked counterclockwise I believe while the cam is held to cause the chain to activate the tensioner but the Mercedes Service documentation I have does not show any further step like that after replacing it and I don't find anything anywhere that says its required for... CLA250 4Matic M270 Timing Chain Tensioner
Does anyone know for the M270 engine after replacing its Timing Chain Tensioner 270-052-14-00 if there is any further step that has to be done to facilitate the tensioner to unlock/release. I know some other models have to be clocked counterclockwise I believe while the cam is held to cause the chain to activate the tensioner but the Mercedes Service documentation I have does not show any further step like that after replacing it and I don't find anything anywhere that says its required for...

CLA250 4Matic M270 Timing Chain Tensioner

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

iCarsoft MB II 2.0

MB II https://www.icarsoft.com/Uploads/download/iCarsoft_MSDIAG_PCClientKits.zip I've misplaced the user's manual/owner's handbook. Shipping $5.00 in the continental USA.
MB II https://www.icarsoft.com/Uploads/download/iCarsoft_MSDIAG_PCClientKits.zip
I've misplaced the user's manual/owner's handbook. Shipping $5.00 in the continental USA.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W208 CLK 320 Oil Cooler Hoses

Hi all, Today I got a missing engine water warning and I opened the hood and checked if there was any leaking hose. I noticed that there is a leak in 2 hoses connected to the oil cooler. I want to order those 2 hoses but i couldnt read the part number. can you please help me to find the part number of those 2 hoses ?
Hi all,

Today I got a missing engine water warning and I opened the hood and checked if there was any leaking hose.

I noticed that there is a leak in 2 hoses connected to the oil cooler. I want to order those 2 hoses but i couldnt read the part number.

can you please help me to find the part number of those 2 hoses ?


---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Vito W638 cutting out and dies at 1200rpm, Idles a bit rough

Hello! My vito w638 112cdi -02 has a problem and it's been standing for about a year now. It all started when i was towing a big caravan that was a bit to much for the engine. It ran and ran at full throttle for about 32 miles and then it started sounding like jakebraking in downhills. Then completely died and started knocking horribly. I have now changed 2 injectors, fuel filter, new o-rings and stretchbolts to 2/4 injectors. Doesn't knock anymore but now it cuts out and dies at... Vito W638 cutting out and dies at 1200rpm, Idles a bit rough
Hello!

My vito w638 112cdi -02 has a problem and it's been standing for about a year now.

It all started when i was towing a big caravan that was a bit to much for the engine. It ran and ran at full throttle for about 32 miles and then it started sounding like jakebraking in downhills. Then completely died and started knocking horribly. I have now changed 2 injectors, fuel filter, new o-rings and stretchbolts to 2/4 injectors.
Doesn't knock anymore but now it cuts out and dies at...

Vito W638 cutting out and dies at 1200rpm, Idles a bit rough

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Connecting Upper Radiator Hose to radiator

Is there a trick to getting the hose to seat far enough in so that the wire clip slides in the groove on the radiator fitting. I had it off and on several times with no problems. Now it won't go far enough on to let the clip fit in the groove. I am about to have a stroke with this whole radiator fan replacement
Is there a trick to getting the hose to seat far enough in so that the wire clip slides in the groove on the radiator fitting. I had it off and on several times with no problems. Now it won't go far enough on to let the clip fit in the groove. I am about to have a stroke with this whole radiator fan replacement

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Circuit 30 voltage?

I've been having some charging gremlins...frequent shutdown of electrical consumers, then red warning lights etc. Did some basic troubleshooting and found a dead aux battery (it was 5+ years old), a good main battery. I've done some live data acquisition and noted the voltage at terminal 30 to be 11.45 to 11.67 volts, and the reported charging current to be under 1A. Both seem troubling if they mean what I think they do. I'm leaning toward a bad alternator / voltage regulator. Any... Circuit 30 voltage?
I've been having some charging gremlins...frequent shutdown of electrical consumers, then red warning lights etc. Did some basic troubleshooting and found a dead aux battery (it was 5+ years old), a good main battery. I've done some live data acquisition and noted the voltage at terminal 30 to be 11.45 to 11.67 volts, and the reported charging current to be under 1A. Both seem troubling if they mean what I think they do.

I'm leaning toward a bad alternator / voltage regulator. Any...

Circuit 30 voltage?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W203 c32 amg Shifter linkage bushing at transmission is missing

Hi I have looked through several posts on the forum and the internet in general and can't seem to find a conclusive answer. I recently purchased a 2004 c32 and had an inspection done by mercedes they found that the shifter bushing at the transmission is missing the quote was 260. From what I have found online this seems like a manageable fix however if anyone has the correct part for the bushing and the metal clasp that secures it that would be appreciated. I usually use fcp euro for parts... W203 c32 amg Shifter linkage bushing at transmission is missing
Hi I have looked through several posts on the forum and the internet in general and can't seem to find a conclusive answer. I recently purchased a 2004 c32 and had an inspection done by mercedes they found that the shifter bushing at the transmission is missing the quote was 260. From what I have found online this seems like a manageable fix however if anyone has the correct part for the bushing and the metal clasp that secures it that would be appreciated. I usually use fcp euro for parts...

W203 c32 amg Shifter linkage bushing at transmission is missing

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Battery drain...parasitic circuit somewhere

Hi all, First time poster, long time reader. I have a 1989 300ce. I don't drive it often, in fact it's been sitting in the garage for about three years. Every year I take it out for a couple of days with the intention of fully restoring. Oh well, I'm rambling. The battery is draining at the rate of 4.11. I've tested the fuses by disconnecting the negative terminal and connecting a multimeter to the post and the terminal...then pulling all the fuses. There was no droppage with the fuses... Battery drain...parasitic circuit somewhere
Hi all,

First time poster, long time reader.

I have a 1989 300ce. I don't drive it often, in fact it's been sitting in the garage for about three years. Every year I take it out for a couple of days with the intention of fully restoring. Oh well, I'm rambling.

The battery is draining at the rate of 4.11. I've tested the fuses by disconnecting the negative terminal and connecting a multimeter to the post and the terminal...then pulling all the fuses. There was no droppage with the fuses...

Battery drain...parasitic circuit somewhere

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Power Steering Bleeding questions

Hi All, When I bought my W211 E55 AMG Wagon in 2021 it had a leaking reservoir seal and the steering was a bit heavy (part of the deal why it was so cheap). I wanted to fix this myself, some mistakes were made which probably introduced air in the system I assume, this is what has been done: PS reservoir was replaced PS fluid was replace with Fuchs Titan CHF11s Speed sensitive steering sensor was replaced twice, one time with Chinese cheap part, second time with German brand... Power Steering Bleeding questions
Hi All,

When I bought my W211 E55 AMG Wagon in 2021 it had a leaking reservoir seal and the steering was a bit heavy (part of the deal why it was so cheap).
I wanted to fix this myself, some mistakes were made which probably introduced air in the system I assume, this is what has been done:
  • PS reservoir was replaced
  • PS fluid was replace with Fuchs Titan CHF11s
  • Speed sensitive steering sensor was replaced twice, one time with Chinese cheap part, second time with German brand...

Power Steering Bleeding questions

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

WHERE do these go? Someone? anyone?

Good day forum folx. I just had my engine bay cleaned and when I looked it over, these 2 pieces were detached. Can anyone help please? I really don't feel like paying 120 for a mechanic... Picture 1: The front grille Picture 2: Engine Bay left side Thanks so much - kerry
Good day forum folx. I just had my engine bay cleaned and when I looked it over, these 2 pieces were detached. Can anyone help please? I really don't feel like paying 120 for a mechanic...
Picture 1: The front grille
Picture 2: Engine Bay left side

















Thanks so
much -
kerry

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

96 S500 driver side mirror

96 S500 Perfect mirror class and mounting. Wiring needs work. Also 2 CD cartridges. 1 Mann air filter. $60 plus shipping.
96 S500 Perfect mirror class and mounting. Wiring needs work. Also 2 CD cartridges. 1 Mann air filter. $60 plus shipping.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New old car, new forum member

I bought a 98 C250 TD yesterday, I'm very pleased with it so far, the most comfortable relaxed drive I've experienced. I plan to twin tank it once I've got a bit more used to it. I get free clean used veg oil locally & have successfully done a couple of previous veg conversions, I enjoy this sort of challenge.
I bought a 98 C250 TD yesterday, I'm very pleased with it so far, the most comfortable relaxed drive I've experienced. I plan to twin tank it once I've got a bit more used to it. I get free clean used veg oil locally & have successfully done a couple of previous veg conversions, I enjoy this sort of challenge.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

1973 450SL for sale

Beautiful anthracite gray on red '73 450SL, last year of the euro bumpers in America. Excellent shape and well kept/serviced. Absolutely no rust. Car was originally sold in Houston. Second owner lived in Naples, Fl. We are the third owners and have owned it for 2 years, bought it in June '21 as a pandemic project. Need to sell as we will be moving out of the country soon. Comes with matching hard top, hard top mount and color-matching AMG front spoiler. Below is a list of service/work done... 1973 450SL for sale
Beautiful anthracite gray on red '73 450SL, last year of the euro bumpers in America. Excellent shape and well kept/serviced. Absolutely no rust. Car was originally sold in Houston. Second owner lived in Naples, Fl. We are the third owners and have owned it for 2 years, bought it in June '21 as a pandemic project. Need to sell as we will be moving out of the country soon. Comes with matching hard top, hard top mount and color-matching AMG front spoiler.

Below is a list of service/work done...

1973 450SL for sale

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Heat pad on 1987 300 sdl

What adhesive should I use to attach a hood heat pad
What adhesive should I use to attach a hood heat pad

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Internal rear view mirror

My rear view mirror has become unstuck fallen off and is now hanging on the cable. Can anyone please recommend the appropriate adhesive/apoxy to use to reattach it. I have tried various adhesive pads and adhesive (from Halfords) but nothing has worked, the mirror is quite heavy. The original adhesive was an apoxy type. Also there was a clear gel at the centre integral to the mirror base which I would like to replace (photochromatic) does anyone know where I can get that? Cheers Mike
My rear view mirror has become unstuck fallen off and is now hanging on the cable. Can anyone please recommend the appropriate adhesive/apoxy to use to reattach it. I have tried various adhesive pads and adhesive (from Halfords) but nothing has worked, the mirror is quite heavy. The original adhesive was an apoxy type.
Also there was a clear gel at the centre integral to the mirror base which I would like to replace (photochromatic) does anyone know where I can get that?
Cheers Mike

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W124

Hi I'm William and new to benzworld! 86 300e, 90 300d 2.5 east coast usa
Hi I'm William and new to benzworld!
86 300e, 90 300d 2.5 east coast usa

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New Forum Member

I am retired, from the information security (large bank mainframe security) world, and bought my GLA specifically to travel and explore US/Canada. My first Benz was a 1998 E-430; what a great car it was! I moved to Canada but could not bring it due to emissions regs. I just want to see & share stories of these fine machines! John
I am retired, from the information security (large bank mainframe security) world, and bought my GLA specifically to travel and explore US/Canada.
My first Benz was a 1998 E-430; what a great car it was! I moved to Canada but could not bring it due to emissions regs.
I just want to see & share stories of these fine machines!

John

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Parts interchangeability

Hello all, I know this topic has been discussed previously. But does anyone know what parts from a w126 280se would work for my 280sl? Because I have the opportunity to pick parts off of a friends car that is in fairly decent condition.
Hello all, I know this topic has been discussed previously. But does anyone know what parts from a w126 280se would work for my 280sl? Because I have the opportunity to pick parts off of a friends car that is in fairly decent condition.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W202 c200 won’t rev over 1200 rpm

Hello my Mercedes w202 won't rev over 1200 if you have any idea what it could be please make a comment I didn't get any fault codes Her is a video IMG 1204
Hello my Mercedes w202 won't rev over 1200 if you have any idea what it could be please make a comment I didn't get any fault codes
Her is a video IMG 1204

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Hello MB World!

Been a Porsche person all my life and finally getting my first MB (2023 GLS 450). Grateful this community exists because I know nothing about Benzs. Dumb question to start - usually Porsche dealers (even in Covid) gave 4% discounts off of MSRP. Anyone know what they are now for MBS (I'm in Florida)?
Been a Porsche person all my life and finally getting my first MB (2023 GLS 450). Grateful this community exists because I know nothing about Benzs.

Dumb question to start - usually Porsche dealers (even in Covid) gave 4% discounts off of MSRP. Anyone know what they are now for MBS (I'm in Florida)?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Road Trip / Shake Down

Just got home from a week away, drove about 1200 miles. Mostly highway driving (1000 miles) and then a bunch of in-town traffic. Averaged about 28 mpg on the first 500 mile leg, but on the return leg, we had terrible traffic on I-95, with lots of slow miles, and mileage dropped to about 26 mpg. In town was awful due to a lot of short trips and lots of stop and go: 16 mpg. The car has developed a very light shake that comes and goes, starts at about 40 mph. It is very noticeable on the... Road Trip / Shake Down
Just got home from a week away, drove about 1200 miles. Mostly highway driving (1000 miles) and then a bunch of in-town traffic. Averaged about 28 mpg on the first 500 mile leg, but on the return leg, we had terrible traffic on I-95, with lots of slow miles, and mileage dropped to about 26 mpg. In town was awful due to a lot of short trips and lots of stop and go: 16 mpg.

The car has developed a very light shake that comes and goes, starts at about 40 mph. It is very noticeable on the...

Road Trip / Shake Down

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New member

Hope I did this right I'm Brad just got a ml55 amg and well that's what brought me here as well as will slowly reveal why I don't like other people working on my vehicles lol. I live in Maine USA and hopefully I can get some advice and get some answers to some questions as I sort things out. Looking forward to working with yall lol. Thanks
Hope I did this right I'm Brad just got a ml55 amg and well that's what brought me here as well as will slowly reveal why I don't like other people working on my vehicles lol. I live in Maine USA and hopefully I can get some advice and get some answers to some questions as I sort things out. Looking forward to working with yall lol. Thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Dealer Service or Indy Shop? 2023 New MBenz E450- 4Matcic Cabrio

Is it inadvisable to take your new MB to a trusted Indy Shop - that specializes in MBs - for your Service A's & B's - or better to go to dealer, pay the egregious mark-up 💲💲💲 for the first 4 years for service cost and then once the 4 years warranty runs out then go to your trusted Indy Shop for those services? | Mercedes-Benz USA www.mbusa.com 😨
Is it inadvisable to take your new MB to a trusted Indy Shop - that specializes in MBs - for your Service A's & B's - or better to go to dealer, pay the egregious mark-up 💲💲💲 for the first 4 years for service cost and then once the 4 years warranty runs out then go to your trusted Indy Shop for those services?



😨

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d