Friday, March 31, 2023

okay

aa
aa

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Peeling clear coat, do I have options?

It's been raining a lot this year in Los Angeles and the peeling clearcoat which started small is getting larger. I'm trying to see if I have any options other than a full respray which I have been quoted around $7,000. If I repaint by panel, they said I will loose the pin stripe in that one section and don't know someone to match that pin stripe. Maybe just get a cheaper full respray? [ATTACH... Peeling clear coat, do I have options?
It's been raining a lot this year in Los Angeles and the peeling clearcoat which started small is getting larger. I'm trying to see if I have any options other than a full respray which I have been quoted around $7,000. If I repaint by panel, they said I will loose the pin stripe in that one section and don't know someone to match that pin stripe. Maybe just get a cheaper full respray?




[ATTACH...

Peeling clear coat, do I have options?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Replacing seat belt latch only

Hey guys I was on a date with my gf and when I dropped her off she left the seat belt dangling from the door and it got grinded on the way home is there any way I can replace the latch only. the retractor works it just that it got tangled and didn't retract.
Hey guys I was on a date with my gf and when I dropped her off she left the seat belt dangling from the door and it got grinded on the way home is there any way I can replace the latch only. the retractor works it just that it got tangled and didn't retract.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Fuel filler neck replace

I have a 2005 320 CLk that needs the fuel filler neck replaced. What am I looking at to DIY it. M/B wants $1500.
I have a 2005 320 CLk that needs the fuel filler neck replaced.
What am I looking at to DIY it. M/B wants $1500.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

URGENT some type of oil leaking behind rear right wheel





---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2003 G55 AMG Backup camera and upgrade infotainment system (head)

I just purchased an '03 G55 AMG for my wife and the first thing she asked for was a backup camera for her car. Can anyone recommend a feasible backup camera system for an '03 G55? Ideally I'd like for it to work with an upgraded infotainment system, if such system exists (I've read about Xtrons systems, but I've never heard of them before). Thanks in advance.
I just purchased an '03 G55 AMG for my wife and the first thing she asked for was a backup camera for her car.
  • Can anyone recommend a feasible backup camera system for an '03 G55?
  • Ideally I'd like for it to work with an upgraded infotainment system, if such system exists (I've read about Xtrons systems, but I've never heard of them before).
Thanks in advance.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Fuel smell some time inside the cabin and outside the car

I have Mercedes w220 2000 year model. The problm Nowadays is fuel smell.when I put the glass down and drive too much fuel smell. When I up the glass no smell inside. I inspect the fuel pump side no leak I can see. The fuel pump and filter was new only 1 year gone I changed. One of mecanic said canister filter which is on driver rear side is bad. Tats why this happening is that true? I want to change it?please guide me I can't see any drop of fuel leak
I have Mercedes w220 2000 year model.
The problm Nowadays is fuel smell.when I put the glass down and drive too much fuel smell. When I up the glass no smell inside. I inspect the fuel pump side no leak I can see. The fuel pump and filter was new only 1 year gone I changed.
One of mecanic said canister filter which is on driver rear side is bad. Tats why this happening is that true? I want to change it?please guide me
I can't see any drop of fuel leak

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

SBU Replacement Aluminum Air Tanks

Hello, I have a 1550L37 Doka that I'm considering replacing the air tanks on. I've heard of them developing rust issues and wanted to swap them out with aluminum tanks. Does anyone know of a compatible tank similar to the ones pictured? mfg. Richard
Hello,

I have a 1550L37 Doka that I'm considering replacing the air tanks on. I've heard of them developing rust issues and wanted to swap them out with aluminum tanks. Does anyone know of a compatible tank similar to the ones pictured?



mfg.

Richard

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Injection to Carb Transition(?)

Well, after fighting with all the different components & adjustments for the wonderful fuel injection system......I called it quits! Removed the octopus & associated components to see how difficult this endever would be, turns out, fairly easy. Convert CCs to CID to help with carb choice. I found a rebuilt Holley one barrel for L250ci 69 Ford Mustang. Made a 4 hole base from a drum brake baking plate but needed to enlarge the center. I used a small lathe but can be done many ways. Then... Injection to Carb Transition(?)
Well, after fighting with all the different components & adjustments for the wonderful fuel injection system......I called it quits!

Removed the octopus & associated components to see how difficult this endever would be, turns out, fairly easy.

Convert CCs to CID to help with carb choice. I found a rebuilt Holley one barrel for L250ci 69 Ford Mustang.

Made a 4 hole base from a drum brake baking plate but needed to enlarge the center. I used a small lathe but can be done many ways.
Then...

Injection to Carb Transition(?)

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Jump Start 1986 560SL

Anything I should know before jump starting? Is there anything special for this model such as any grounding posts etc. or can I just attach positive battery of good car to positive battery of the SL and negative battery of good car to metal trunk of the SL?
Anything I should know before jump starting? Is there anything special for this model such as any grounding posts etc. or can I just attach positive battery of good car to positive battery of the SL and negative battery of good car to metal trunk of the SL?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Soft top won't close -- red light on switch flashes

After leaving the hard top on for several months, we removed it after pushing the red top button back. We heard all the top cylinders fire, and the hard top lifted off with no problem. When I pushed the red button forward to close soft top, I got red light flash and no movement. After checking fuses, battery, etc. I looked down into the left and right latches at the rear of the top. Passenger side was "down" and drive side latch was "up". It looks to me like the driver side is in the... Soft top won't close -- red light on switch flashes
After leaving the hard top on for several months, we removed it after pushing the red top button back. We heard all the top cylinders fire, and the hard top lifted off with no problem. When I pushed the red button forward to close soft top, I got red light flash and no movement. After checking fuses, battery, etc. I looked down into the left and right latches at the rear of the top.

Passenger side was "down" and drive side latch was "up". It looks to me like the driver side is in the...

Soft top won't close -- red light on switch flashes

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Spacer question

My Lorinser RSK5 rims made for R129 came with spacers that bolted onto the wheel itself with 3 little M6x12mm socket head screws. What is this type of spacer called? It doesn't seem very safe. Should I get rid of it and buy new spacers? At the same time, it's Lorinser so why would they make such a shitty spacer for mercedes? Furthermore, the screws are stripped so I will have to replace them if I continue using them. Good idea or bad? If I do buy new spacers, I will need 30mm per wheel... Spacer question
My Lorinser RSK5 rims made for R129 came with spacers that bolted onto the wheel itself with 3 little M6x12mm socket head screws. What is this type of spacer called? It doesn't seem very safe. Should I get rid of it and buy new spacers? At the same time, it's Lorinser so why would they make such a shitty spacer for mercedes?

Furthermore, the screws are stripped so I will have to replace them if I continue using them. Good idea or bad?

If I do buy new spacers, I will need 30mm per wheel...

Spacer question

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Flex Disks replacement?

Has anyone replaced the front and rear flex disks on their SL? If so, how old were they and what mileage was it done? Also, any ball park cost for an indy to do the job. Thanks for any info.
Has anyone replaced the front and rear flex disks on their SL? If so, how old were they and what mileage was it done? Also, any ball park cost for an indy to do the job. Thanks for any info.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W211 without chrome trim strips?

I just realized the w211 I got doesn't have the bottom chrome trim pieces. I think I've seen a couple other w211s without the chrome strips, but I just wanted to know how hard would it be to replace the non chrome trim parts with the chrome ones. It's not that big of a deal, the rear and sides may even look better without the chrome, but you can tell something is missing on the front bumper without the strips once you pay attention to it.
I just realized the w211 I got doesn't have the bottom chrome trim pieces. I think I've seen a couple other w211s without the chrome strips, but I just wanted to know how hard would it be to replace the non chrome trim parts with the chrome ones. It's not that big of a deal, the rear and sides may even look better without the chrome, but you can tell something is missing on the front bumper without the strips once you pay attention to it.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

'Trans ecu defective'

05 S500 .. code showing for defective trans ecu. Trans shifts v smooth up through 7 gears. On way down, depending on speed, there is a jerk at low speed due to skipping of a gear going down inherent to the 7 speed. So .. do I attack the ecu code .. or leave it alone for now??
05 S500 .. code showing for defective trans ecu. Trans shifts v smooth up through 7 gears. On way down, depending on speed, there is a jerk at low speed due to skipping of a gear going down inherent to the 7 speed.
So .. do I attack the ecu code .. or leave it alone for now??

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

lost my ml key!

hello, I lost my 2001 ml320 key, I tried to do a search but they are all about the key fob. called Mercedes and they said they don't do older than 2010, were else can I get a new key? located close to Atlanta. thanks!
hello, I lost my 2001 ml320 key, I tried to do a search but they are all about the key fob. called Mercedes and they said they don't do older than 2010, were else can I get a new key? located close to Atlanta. thanks!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

The roof seam repair question

So the main seam at the back has parted and the fabric is coming out from behind the rear window on one side.... Gawd I hate convertibles almost as much as air suspenders. In the past people have posted about re-glueing the seam. Not sure what do do about the rear window. I am minded to either buy a used roof cloth and pre-emptively take it to a sailmaker and have that seam reglued and sewn up or to take my roof off and do the same. Don't really want to spend over a grand for a new... The roof seam repair question
So the main seam at the back has parted and the fabric is coming out from behind the rear window on one side.... Gawd I hate convertibles almost as much as air suspenders.

In the past people have posted about re-glueing the seam. Not sure what do do about the rear window.

I am minded to either buy a used roof cloth and pre-emptively take it to a sailmaker and have that seam reglued and sewn up or to take my roof off and do the same.

Don't really want to spend over a grand for a new...

The roof seam repair question

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Rear Spacer Recommendations

Hi all. I have a SA and would love showcase the rear wheels more. Does anyone have recommendation on spacer size and spacer brands? Im not a technical car guy but looking at the tire to be flush at the fender.
Hi all. I have a SA and would love showcase the rear wheels more. Does anyone have recommendation on spacer size and spacer brands? Im not a technical car guy but looking at the tire to be flush at the fender.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

COMAND NTG1 Won’t enter update mode

Apologies if I'm missing something, I'm trying to do a firmware update on my COMAND NTG1. I've spent the last 2 hours trying different suggestions from YouTube and Google etc but I can't get the unit to accept any of the suggested key sequences and enter update mode. I've tried 1+3+8 etc. Is there any other way for it to accept and recognise the firmware update disc? Anybody suggest any ideas.
Apologies if I'm missing something, I'm trying to do a firmware update on my COMAND NTG1. I've spent the last 2 hours trying different suggestions from YouTube and Google etc but I can't get the unit to accept any of the suggested key sequences and enter update mode. I've tried 1+3+8 etc. Is there any other way for it to accept and recognise the firmware update disc?

Anybody suggest any ideas.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W124 MBZ 1987 260E Manual

Does anyone have a suggestion on which manual for my 87 MBZ? I am needing to reseal upper timing cover. Another repair needed is rebuild steering box. Thanks
Does anyone have a suggestion on which manual for my 87 MBZ? I am needing to reseal upper timing cover. Another repair needed is rebuild steering box. Thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

W124 E200, No power to fuel pump

Hi guys, my w124 E200 (m111.940) recently broke down, it suddenly stopped on the road as if I had run out of gas, it started up again after at least 10 tries. I took the opportunity to bring it home but since then it won't start at all! I noticed afterwards that the fuel pump no longer made a sound when I turned the key. So I first changed the fuel pump with a new one (it had trouble accelerating at high speed and climbing hills on the highway so for me it was logical that it was the fuel... W124 E200, No power to fuel pump
Hi guys, my w124 E200 (m111.940) recently broke down, it suddenly stopped on the road as if I had run out of gas, it started up again after at least 10 tries. I took the opportunity to bring it home but since then it won't start at all! I noticed afterwards that the fuel pump no longer made a sound when I turned the key. So I first changed the fuel pump with a new one (it had trouble accelerating at high speed and climbing hills on the highway so for me it was logical that it was the fuel...

W124 E200, No power to fuel pump

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2010 - 2013 W221 Original Grille

Original factory grille from my 2012 S 400. Very nice condition. Fits 2010-2013 S class with or without Distronic Cruise Control. New OEM grilles on Ebay are listed for $200 to $400 + shipping. I will take your first offer + shipping Im in San Diego, CA. BCBOUND1@YAHOO.COM
Original factory grille from my 2012 S 400. Very nice condition. Fits 2010-2013 S class with or without Distronic Cruise Control. New OEM grilles on Ebay are listed for $200 to $400 + shipping. I will take your first offer + shipping
Im in San Diego, CA.
BCBOUND1@YAHOO.COM

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Original Factory Hood Ornament

Original factory hood star ornament from my 2012 W221 S class. Nice shape. Will take your offer + shipping. This will fit the following : 2018 Mercedes-Benz C 300 All models 2017 Mercedes-Benz C 300 All models 2016 Mercedes-Benz C 300 All models 2015 Mercedes-Benz C 300 All models 2018 Mercedes-Benz C 350 e All models 2017 Mercedes-Benz C 350 e All models 2015 Mercedes-Benz C 400 All models 2016 Mercedes-Benz C 450 All models 2018 Mercedes-Benz C 43 AMG® All models 2017 Mercedes-Benz C 43... Original Factory Hood Ornament
Original factory hood star ornament from my 2012 W221 S class. Nice shape. Will take your offer + shipping.
This will fit the following :

2018 Mercedes-Benz C 300 All models
2017 Mercedes-Benz C 300 All models
2016 Mercedes-Benz C 300 All models
2015 Mercedes-Benz C 300 All models
2018 Mercedes-Benz C 350 e All models
2017 Mercedes-Benz C 350 e All models
2015 Mercedes-Benz C 400 All models
2016 Mercedes-Benz C 450 All models
2018 Mercedes-Benz C 43 AMG® All models
2017 Mercedes-Benz C 43...

Original Factory Hood Ornament

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

FS 1985 300D

Just under 190,000 miles. More pictures available for interested parties. Willing to negotiate price. Car has driven well until a few weeks ago, when I was no longer able to get it going much faster than 25mph. I would guess it needs a new transmission. Outside: oxidation on the hood and roof's paint. Brand new tires installed in February. Windshield replaced a month ago.A piece of chrome trim is missing on the left rear passenger side door. Inside: Automatic working moon roof. A/C and... FS 1985 300D
Just under 190,000 miles. More pictures available for interested parties. Willing to negotiate price.

Car has driven well until a few weeks ago, when I was no longer able to get it going much faster than 25mph. I would guess it needs a new transmission.



Outside: oxidation on the hood and roof's paint. Brand new tires installed in February. Windshield replaced a month ago.A piece of chrome trim is missing on the left rear passenger side door.

Inside: Automatic working moon roof. A/C and...

FS 1985 300D

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

I Love cars!

My name is Franco, sometime is hard and you need a collaboration help.
My name is Franco, sometime is hard and you need a collaboration help.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Custom Made Cup Holder for W113

Custom made cup cup hold for W113 Size: W 5 5/8, H 2 3/4, L 20 5/8 Price included shipping
Custom made cup cup hold for W113
Size: W 5 5/8, H 2 3/4, L 20 5/8
Price included shipping










---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Did anyone color their Bundt wheels?

Did anyone colored their Bundt wheels other than Astral silver? I got the chrome ones, which I always, in the past, found a bit tacky. Now I'm okay with them. I was wondering if any of you see bronze colored Bundt wheels. Please add pictures even if they are different colors. I might get winter tires and might be be tempted to try out a new color scheme.
Did anyone colored their Bundt wheels other than Astral silver? I got the chrome ones, which I always, in the past, found a bit tacky. Now I'm okay with them.

I was wondering if any of you see bronze colored Bundt wheels. Please add pictures even if they are different colors. I might get winter tires and might be be tempted to try out a new color scheme.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

THE....."I Bought a New Tool!"..... Thread

Prompted by another thread...I bought something that I didn't have. Who knew. Metric Angle Head Open End Wrench Set (12-Piece) | TEKTON | WAE91201
Prompted by another thread...I bought something that I didn't have. Who knew.

Metric Angle Head Open End Wrench Set (12-Piece) | TEKTON | WAE91201


---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

420SEL Camshaft Sprocket

Having a hard time finding part: Mercedes-Benz Camshaft Gear 116-052-06-01 Mercedes says that they can supply two of these in 6 months. The charge about $200 each. I see other sites that charge about $50 for the Febi Bilstein, and they say they have them in stock. I really don't want to wait 6 months. Is the Febi OK in terms of quality? If you get what you pay for, then the Febi sounds risky. Thanks
Having a hard time finding part: Mercedes-Benz Camshaft Gear 116-052-06-01
Mercedes says that they can supply two of these in 6 months. The charge about $200 each.
I see other sites that charge about $50 for the Febi Bilstein, and they say they have them in stock.
I really don't want to wait 6 months. Is the Febi OK in terms of quality? If you get what you pay for, then the Febi sounds risky.

Thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Sunroof won't move but I hear the motor spinning

So the sunroof in this 2010 C300 just stays in place when you push the open/close button. However, for all 4 positions, Up, down, open and close, I can hear the motor turn and then stop as if the roof reached the open, up, down or closed position the button tells it to do. I'm thinking this is a cable issue and I saw somewhere that someone put a metal washer on a gear at the motor to replace a factory plastic one that wears out and moves the gear from engaging with the motor. Not afraid to... Sunroof won't move but I hear the motor spinning
So the sunroof in this 2010 C300 just stays in place when you push the open/close button. However, for all 4 positions, Up, down, open and close, I can hear the motor turn and then stop as if the roof reached the open, up, down or closed position the button tells it to do. I'm thinking this is a cable issue and I saw somewhere that someone put a metal washer on a gear at the motor to replace a factory plastic one that wears out and moves the gear from engaging with the motor. Not afraid to...

Sunroof won't move but I hear the motor spinning

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Will 2011 17" e350 rims fit 2013 e350?

We have a 2013 with 2 bent 18" chrome rims and looking online the rims are $800 used. Uhh no. This is a family car, and with all the potholes will bend another one soon, IMO better to get fatter tires. I found some used 2011 e350 17's, will those fit the 2013 e350 or will calipers etc be an issue?
We have a 2013 with 2 bent 18" chrome rims and looking online the rims are $800 used. Uhh no. This is a family car, and with all the potholes will bend another one soon, IMO better to get fatter tires. I found some used 2011 e350 17's, will those fit the 2013 e350 or will calipers etc be an issue?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2023 GLA 250 4MATIC easy entry/exit will not work

Just purchased a new GLA for my wife she is only 5' and need the seat pretty far forward and the easy entry/exit function will not work for her and also for me. We have the seat setting set for us as well. Brought the car back to the dealer and was informed by the service department that it would only work when it is in a certain position. They have seen this issue across multiple lines of vehicles and they cannot fix it. Was told that it must be done via programming software update. I... 2023 GLA 250 4MATIC easy entry/exit will not work
Just purchased a new GLA for my wife she is only 5' and need the seat pretty far forward and the easy entry/exit function will not work for her and also for me. We have the seat setting set for us as well. Brought the car back to the dealer and was informed by the service department that it would only work when it is in a certain position. They have seen this issue across multiple lines of vehicles and they cannot fix it. Was told that it must be done via programming software update. I...

2023 GLA 250 4MATIC easy entry/exit will not work

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Nardi 3320 15mm hub polished for sale or trade

Hi I wanted to see if anyone would be interested in a Nardi 3320 hub with the 15 mm spline I bought it for my 560sl not realizing there were 3 different spline sizes over the production run. I've gone through the trouble of having it mirror polished and ceramic coated. I'm open for reasonable offers. Please pm. Also if anyone has the 3350 hub that would fit my 560sl I'd be open to buy that or trade mine for it. [ATTACH... Nardi 3320 15mm hub polished for sale or trade
Hi I wanted to see if anyone would be interested in a Nardi 3320 hub with the 15 mm spline I bought it for my 560sl not realizing there were 3 different spline sizes over the production run. I've gone through the trouble of having it mirror polished and ceramic coated. I'm open for reasonable offers. Please pm. Also if anyone has the 3350 hub that would fit my 560sl I'd be open to buy that or trade mine for it.


[ATTACH...

Nardi 3320 15mm hub polished for sale or trade

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

CLA250 C117 Toque Specs on Suspension

Hello, i bought new springs for my 2018 CLA250 Base and i need the torque specs on the front and rear suspension for when i put it back together, thank you in advance
Hello, i bought new springs for my 2018 CLA250 Base and i need the torque specs on the front and rear suspension for when i put it back together, thank you in advance

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Ignition Control Unit location

Where exactly is the Ignition Cobntrol Unit located on 1990 190e 2.6? Thanks
Where exactly is the Ignition Cobntrol Unit located on 1990 190e 2.6? Thanks

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

🕊️🙏🏾

This forum will really help me gain more insight & knowledge about basic functions, principles on automobiles electrical.. God bless everyone of us in here, thank you admin🙏🏾
This forum will really help me gain more insight & knowledge about basic functions, principles on automobiles electrical.. God bless everyone of us in here, thank you admin🙏🏾

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Headbolt removal and offset woodruff key 560sl

Good Morning 107 community! I know removing the headbolts is straightforward but I would like to reuse the bolts and prevent using time serts.. my 2nd question is how would I know which offset woodruff key do I need if my heads are getting shaved down. Thank you!
Good Morning 107 community!
I know removing the headbolts is straightforward but I would like to reuse the bolts and prevent using time serts.. my 2nd question is how would I know which offset woodruff key do I need if my heads are getting shaved down.
Thank you!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

1994 Mercedes Benz S600 accelerating issues

Greetings everyone. I am from South Africa. I have a 1994 Mercedes Benz S600 (W140). Recently I have had this problem that does not even pick up on the revs as soon as I engage the gears. Even if I press down on the accelerator paddle. However...when I switch it OFF again...and start it again...then I can rev it. So..the problem is only there when I engage the gears. I need some advice, please...as I have to get the beast sorted before my daughter's wedding in October! Thank you in advance... 1994 Mercedes Benz S600 accelerating issues
Greetings everyone. I am from South Africa. I have a 1994 Mercedes Benz S600 (W140). Recently I have had this problem that does not even pick up on the revs as soon as I engage the gears. Even if I press down on the accelerator paddle. However...when I switch it OFF again...and start it again...then I can rev it. So..the problem is only there when I engage the gears. I need some advice, please...as I have to get the beast sorted before my daughter's wedding in October! Thank you in advance...

1994 Mercedes Benz S600 accelerating issues

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Swapping w212 steering

Hi guys, so its been like 2 weeks that i am concistantly on a hunt for a solution for my w212 2010 model whose steering i wish to upgrade to the 2013 model some say its no problem and is a simple swap however some say i need to buy an angle sensor to make the new steering wheel work (angle sensor is quite expensive) can anyone enlighten me what i should be doing? I dont want to pay any seller and receive a product which is not suitable
Hi guys, so its been like 2 weeks that i am concistantly on a hunt for a solution for my w212 2010 model whose steering i wish to upgrade to the 2013 model

some say its no problem and is a simple swap however some say i need to buy an angle sensor to make the new steering wheel work (angle sensor is quite expensive)

can anyone enlighten me what i should be doing? I dont want to pay any seller and receive a product which is not suitable

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

new generation hot rodders embrace M120 V12 Benz motor

✂ V12 hot rod Unleashing the Power: Exploring the Mercedes-Benz S-Class W140 S600 V12 Engine M120 ✂ fire up v12 mod get it ? got it ? good...
---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

slk200 rear subframe

Hi Dave My 54 plate (reg October 2004) SLK 200 has just failed on this dreaded corrosion problem. Booked into local Merc dealer for assessment next week to see if it will be covered wholly by MB or at reduced cost. Any advice would be appreciated
Hi Dave
My 54 plate (reg October 2004) SLK 200 has just failed on this dreaded corrosion problem. Booked into local Merc dealer for assessment next week to see if it will be covered wholly by MB or at reduced cost. Any advice would be appreciated

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2012 W221 Fuel Pump

I just had a question about the fuel pump on this vehicle. I was looking at the Carfax and it was changed approximately 37,000 miles as failing. Are these pumps known to go out prematurely or normally from my technician training pumps generally do not go out unless you are driving around less than a quarter of a tank of gas all the time or very frequently. I'm trying to put the pieces of the puzzle together amongst six previous owners of this vehicle. I need to make about three calls to... 2012 W221 Fuel Pump
I just had a question about the fuel pump on this vehicle. I was looking at the Carfax and it was changed approximately 37,000 miles as failing. Are these pumps known to go out prematurely or normally from my technician training pumps generally do not go out unless you are driving around less than a quarter of a tank of gas all the time or very frequently. I'm trying to put the pieces of the puzzle together amongst six previous owners of this vehicle. I need to make about three calls to...

2012 W221 Fuel Pump

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2007 CLS 550 Wiring Harness

Hi all, I am having trouble codes P0030, P0050 (Heater circuit codes) and P0300 - P0304 (Misfire codes cylinders 1 - 4 on the passenger side) on a CLS 550. I got into the passenger side engine harness and found the cluster of red wires that look to me to have shorted at the left end tip highlighted in the attached photo. I'm wanting to verify if this looks normal for this harness or if this indeed looks like something shorted? I also included a photo of the underside of the harness "casing"... 2007 CLS 550 Wiring Harness
Hi all, I am having trouble codes P0030, P0050 (Heater circuit codes) and P0300 - P0304 (Misfire codes cylinders 1 - 4 on the passenger side) on a CLS 550. I got into the passenger side engine harness and found the cluster of red wires that look to me to have shorted at the left end tip highlighted in the attached photo. I'm wanting to verify if this looks normal for this harness or if this indeed looks like something shorted? I also included a photo of the underside of the harness "casing"...

2007 CLS 550 Wiring Harness

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

R/C 107 Bosch Euro Headlights

Used 107 Bosch Euro Headlights. Glass uncracked, orange side marker lights slightly cracked. Under headlight body trim clean & in good shape. All four pigtails included. One needs resilvering on the inside. Bulbs & mounting screws included. More pics on request. $1,200.00 plus shipping. Leave me a message or email me @ mercedes.patronis@gmail.com Thanks Rev. Buzz
Used 107 Bosch Euro Headlights.
Glass uncracked, orange side marker lights slightly cracked. Under headlight body trim clean & in good shape. All four pigtails included. One needs
resilvering on the inside. Bulbs & mounting screws included. More pics on request.
$1,200.00 plus shipping.
Leave me a message or email me @
mercedes.patronis@gmail.com
Thanks
Rev. Buzz

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Fuel Consumption?

I currently own an 2001 C32. my city fuel consumption is at 21L/100km. I have checked my air filter, tire pressure and cleaned my MAF sensor. But i am still getting 21L/100km and i do a bit of spirited driving and granny driving... anyone have any thoughts on why i am gettin 21L/100km?
I currently own an 2001 C32. my city fuel consumption is at 21L/100km.

I have checked my air filter, tire pressure and cleaned my MAF sensor. But i am still getting 21L/100km and i do a bit of spirited driving and granny driving...

anyone have any thoughts on why i am gettin 21L/100km?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2009 E550 ticking in 3rd gear

Greetings, I am here in search of some advice regarding this issue I have had for a while and have failed to address. My '09 E550 RWD (722.9 trans) occasionally makes a slightly metallic tapping noise from the engine / transmission area when under light acceleration in seemingly 3rd gear only. Hesitation / engine stutter accompanied this sound only once when lightly accelerating uphill, every other time the engine delivers power perfectly during the noise. I have been unable to record the... 2009 E550 ticking in 3rd gear
Greetings, I am here in search of some advice regarding this issue I have had for a while and have failed to address. My '09 E550 RWD (722.9 trans) occasionally makes a slightly metallic tapping noise from the engine / transmission area when under light acceleration in seemingly 3rd gear only. Hesitation / engine stutter accompanied this sound only once when lightly accelerating uphill, every other time the engine delivers power perfectly during the noise.

I have been unable to record the...

2009 E550 ticking in 3rd gear

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Sport Pack rims for w212

Hello to everyone ! From a month I have MB w212 e300 2014 model with stock wheels 245/45/17. I'd like to change them with 245/40/18 and I am wondering for one pair rims sport pack if are they situable for my car Front 18J/18/ ET43 with tyres 245/40/18 Rear 19J/18/ET 52.5 with tyres 265/35/18 Thanks for everyone in advance !
Hello to everyone !
From a month I have MB w212 e300 2014 model with stock wheels 245/45/17.
I'd like to change them with 245/40/18 and I am wondering for one pair rims sport pack if are they situable for my car
Front 18J/18/ ET43 with tyres 245/40/18
Rear 19J/18/ET 52.5 with tyres 265/35/18

Thanks for everyone in advance !

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Getting mech to replace electrical transmission board - anything i should suggest to check whilst they do it

Buying new transmission board and getting it installed. Wondering what else I should ask them to check, especially cheap things. Thanks in advance.
Buying new transmission board and getting it installed. Wondering what else I should ask them to check, especially cheap things. Thanks in advance.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Thursday, March 30, 2023

Returning member that appreciates this site

Hi, not sure what my old login was but this updated site automatically created new one.
Hi, not sure what my old login was but this updated site automatically created new one.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Date of Manufacture?

How to determine date of manufacture?
How to determine date of manufacture?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Need helping sourcing clutch part

Does anybody here know what car a sachs sd651 clutch plate goes in? I got one for a custom transmission swap I'm doing in my 1979 200 but it was broken due to a stuck pilot bearing. I cannot find another one for sale anywhere nor do I know what car it normally goes in to be able to find a facsimile best I can find is dead links and out of stock listings. One old ebay add said it fits an 84' to 87' 190e but autohauz's listing says it doesn't. Any information is greatly appreciated
Does anybody here know what car a sachs sd651 clutch plate goes in? I got one for a custom transmission swap I'm doing in my 1979 200 but it was broken due to a stuck pilot bearing. I cannot find another one for sale anywhere nor do I know what car it normally goes in to be able to find a facsimile best I can find is dead links and out of stock listings. One old ebay add said it fits an 84' to 87' 190e but autohauz's listing says it doesn't. Any information is greatly appreciated

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Oil Leak ID - 07 E320

So I have an oil leak at the rear of the engine. There is a rubber grommet with a hole in it on the bottom of the transmission bell housing and the oil is dripping out this hole, so above that is where the leak is. When I noticed the oil leak I suspected it was the oil cooler seals, but noting that the sides of the engine where it mates to the transmission are dry, leads me to believe that it is the rear seal. The engine has 164K and so the rear seal could be worn some? Is it possible... Oil Leak ID - 07 E320
So I have an oil leak at the rear of the engine. There is a rubber grommet with a hole in it on the bottom of the transmission bell housing and the oil is dripping out this hole, so above that is where the leak is. When I noticed the oil leak I suspected it was the oil cooler seals, but noting that the sides of the engine where it mates to the transmission are dry, leads me to believe that it is the rear seal. The engine has 164K and so the rear seal could be worn some? Is it possible...

Oil Leak ID - 07 E320

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2004 SL55 AMG Troubleshooting

Hello and thank you for taking the time to read my post. I am a new R230 owner and have two issues I could use some advice on. #1 This one to me is strange. With the stereo off (or on) I get a high pitched feedback squeal coming from the passenger door speaker. If I turn the rear defroster on, the squealing stops. It immediately starts back up once the rear defroster is disengaged, either manually or by timing out. My solution at this point is to continuously run the rear defroster. This... 2004 SL55 AMG Troubleshooting
Hello and thank you for taking the time to read my post. I am a new R230 owner and have two issues I could use some advice on.

#1 This one to me is strange. With the stereo off (or on) I get a high pitched feedback squeal coming from the passenger door speaker. If I turn the rear defroster on, the squealing stops. It immediately starts back up once the rear defroster is disengaged, either manually or by timing out. My solution at this point is to continuously run the rear defroster. This...

2004 SL55 AMG Troubleshooting

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Seat belt light

Hi to all you Mercedes lovers I'm a newbie here first post... I have a 2003 CLK 240 coupe.. My seat belt light comes on randomly and stays on. but not for my seat belt mine is inserted in the buckle holder so it's not coming on for my seat belt It happens when the passenger seat belt isn't in the holder when I plug it in the light goes out so I'm thinking the scensor is telling the computer that there is some one sitting in the seat and seat belt not inserted in the holder now I just keep... Seat belt light
Hi to all you Mercedes lovers I'm a newbie here first post...
I have a 2003 CLK 240 coupe..

My seat belt light comes on randomly and stays on. but not for my seat belt mine is inserted in the buckle holder so it's not coming on for my seat belt It happens when the passenger seat belt isn't in the holder when I plug it in the light goes out so I'm thinking the scensor is telling the computer that there is some one sitting in the seat and seat belt not inserted in the holder now I just keep...

Seat belt light

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

timing for M278

Hey, I have a 2014 GL450 with a CEL and code P001685. I intend to retime the engine and have some questions. That is where I am at. Do I need to remove the heads to replace the chain guides? I ordered a timing kit and it included, among other things, only the black plastic guides and open chains. The metal guides were not included. So is the procedure for that those parts to cut... timing for M278
Hey,

I have a 2014 GL450 with a CEL and code P001685. I intend to retime the engine and have some questions.

That is where I am at.

Do I need to remove the heads to replace the chain guides?

I ordered a timing kit and it included, among other things, only the black plastic guides and open chains. The metal guides were not included. So is the procedure for that those parts to cut...

timing for M278

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2000 SL500 with blower fan issues

So I replaced my blower fan and I still have issues where the fan is not doing what the fan indicator says it is supposed to do. IE put on hi and blows low or just simply has a mind of its own? What to do??
So I replaced my blower fan and I still have issues where the fan is not doing what the fan indicator says it is supposed to do. IE put on hi and blows low or just simply has a mind of its own?
What to do??

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Paint code

Ok. I would like to check that I order the correct painf color. I've read and read, but just want to check. So, thanks!! 1985 380SL Is the 199 the correct code for the color?? Black Pearl Metallica ? Thanks!! Gene in NH
Ok. I would like to check that I order the correct painf color. I've read and read, but just want to check. So, thanks!!

1985 380SL


Is the 199 the correct code for the color?? Black Pearl Metallica ?

Thanks!!
Gene in NH

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Newbie

It's a pleasure to makes everyone's acquaintance & though I've driven a ML350 for years now, I've become more of an enthusiast as time went on. As a proper enthusiast, I decided to jump in on the deep end & recently, (1 month ago) purchased an 06' SL55 AMG with just under 50K on the odometer. I haven't had the opportunity to post photos of it yet, but I'm asking for any standout & original ideas for vanity plates. Thanks in advance & I look forward to being a member of the community!
It's a pleasure to makes everyone's acquaintance & though I've driven a ML350 for years now, I've become more of an enthusiast as time went on. As a proper enthusiast, I decided to jump in on the deep end & recently, (1 month ago) purchased an 06' SL55 AMG with just under 50K on the odometer. I haven't had the opportunity to post photos of it yet, but I'm asking for any standout & original ideas for vanity plates.
Thanks in advance & I look forward to being a member of the community!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

C32 - Cluster LCD

I replaced the original display a few years back due to fading. A few months ago it started to flicker, not long after it was blank with intermittent background illumination. I ordered the exact LCD this time around. The same result after installing the new one. I unplugged and cleaned the socket with CRC. It worked fine for a short period after plugging back in. I am seeking advice at this point. Any insight would be appreciated. Cheers.
I replaced the original display a few years back due to fading. A few months ago it started to flicker, not long after it was blank with intermittent background illumination. I ordered the exact LCD this time around. The same result after installing the new one. I unplugged and cleaned the socket with CRC. It worked fine for a short period after plugging back in.

I am seeking advice at this point. Any insight would be appreciated.

Cheers.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Frustrating relay replacement problem...

My passenger side running light was out I had no power to the socket and I had an occasional bulb failure light, this lead me to believe my lamp module, part number 129 542 04 32 could be acting up. Beckmann wanted $120 to test the old one but I found a new one for $180 so I went that way. I plugged the new one in and now both of my running lights were out, all other exterior lights worked fine. I thought let me plug in my old relay and see if at least one running light comes back on. So I... Frustrating relay replacement problem...
My passenger side running light was out I had no power to the socket and I had an occasional bulb failure light, this lead me to believe my lamp module, part number 129 542 04 32 could be acting up. Beckmann wanted $120 to test the old one but I found a new one for $180 so I went that way. I plugged the new one in and now both of my running lights were out, all other exterior lights worked fine.

I thought let me plug in my old relay and see if at least one running light comes back on. So I...

Frustrating relay replacement problem...

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2005 kompressor

I have a question about bumper covers. will a non sport model cover fit a sport model?
I have a question about bumper covers. will a non sport model cover fit a sport model?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Car won't maintain idle wind warm on 95 S500

I have read numerous threads on this forum in regards the. Lack of being able to maintain idle on a vehicle when warm. One of the possibilities is fuel regulator and possibly fuel pump. I changed the regulator no help, I tested the fuel pump pressure and 45 to 50 lbs. Again no problem. Is there a module or component that regulates the idle? Any other ideas out there? Bryce Mack 95 S500 (black) 95 S500 (CHARCOAL) 95 S500 (silver)
I have read numerous threads on this forum in regards the. Lack of being able to maintain idle on a vehicle when warm.

One of the possibilities is fuel regulator and possibly fuel pump. I changed the regulator no help, I tested the fuel pump pressure and 45 to 50 lbs. Again no problem. Is there a module or component that regulates the idle?

Any other ideas out there?

Bryce Mack
95 S500 (black)
95 S500 (CHARCOAL)
95 S500 (silver)

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Help with buying a E420 1995

I've been eyeing a 1995 E420 W124 with 26 000km, however the seller says it only starts sometimes as it has electrical issues and it's been sitting for a long time. It also has a bit of rust on the boot. But I'm worrying it may have more rust than it seems as it's been sitting. It's selling for 4000$. Is it worth getting it and fixing it up or not?
I've been eyeing a 1995 E420 W124 with 26 000km, however the seller says it only starts sometimes as it has electrical issues and it's been sitting for a long time. It also has a bit of rust on the boot. But I'm worrying it may have more rust than it seems as it's been sitting. It's selling for 4000$. Is it worth getting it and fixing it up or not?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New member

Hi my nave is Dave, I have a 2011 350E with 120,000 miles on it. I also have a 1938 Studebaker State Commander with 90,000 miles. The 38 is a barn fine from NW PA where it was stored for 42 years. I rebuilt the engine, trans, brakes, electrical and front suspension. Buffed out the original paint. I've also redid a 49 Ford F3 pickup and sold that. The new electronics keep me from doing much on the 350E but I love the way the car runs on the highway. Looking forward to learning more about the... New member
Hi my nave is Dave, I have a 2011 350E with 120,000 miles on it. I also have a 1938 Studebaker State Commander with 90,000 miles. The 38 is a barn fine from NW PA where it was stored for 42 years. I rebuilt the engine, trans, brakes, electrical and front suspension. Buffed out the original paint. I've also redid a 49 Ford F3 pickup and sold that. The new electronics keep me from doing much on the 350E but I love the way the car runs on the highway. Looking forward to learning more about the...

New member

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

No light interior colors for GLC 4matic AMG???

I've been a Mercedes Benz enthusiast for decades. I've always gravitated towards the lighter interiors. I want to get a GLC 4matic with 20 inch tires which puts me in the AMG category… Why is it that there are no choices for any light color interiors once you go AMG? Not even in the leather options! The lightest option with this vehicle is saddle! You would think with a car this high and you would have more options. Thanks for letting me vent! I am in the US.
I've been a Mercedes Benz enthusiast for decades. I've always gravitated towards the lighter interiors. I want to get a GLC 4matic with 20 inch tires which puts me in the AMG category… Why is it that there are no choices for any light color interiors once you go AMG? Not even in the leather options! The lightest option with this vehicle is saddle! You would think with a car this high and you would have more options. Thanks for letting me vent! I am in the US.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Oil level warning.

Friend bought a 07/2003 sl500 with 106,000 miles. Located in Merced, CA. No owners manual, and no service history. (16 spark plugs) Oil level warning light comes on, and goes out, but comes back on. No generic codes with OBDII scanner. (Light/ warning, was off at the time.) Question is why.? To much oil, or to little oil. He says there is no oil on the ground. Sensor.?? It has a paper sticker on the windshield, stating it was serviced 3000 miles ago, and a reminder to service in 3000... Oil level warning.
Friend bought a 07/2003 sl500 with 106,000 miles. Located in Merced, CA.
No owners manual, and no service history. (16 spark plugs):(

Oil level warning light comes on, and goes out, but comes back on.
No generic codes with OBDII scanner. (Light/ warning, was off at the time.)
Question is why.? To much oil, or to little oil. He says there is no oil on the ground. Sensor.??

It has a paper sticker on the windshield, stating it was serviced 3000 miles ago, and a reminder to service in 3000...

Oil level warning.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

4 Different Hitch Mount Bike Rack Systems by Thule

Are you ready to hit the open road and take your summer adventures up a gear? With Thule's four hitch-mount bike rack designs, you can take your biking experience with you wherever you go! Our quality bike racks are sure to meet all of your needs. Thule® - Apex™ XT Hitch Mount Bike Rack The Apex is perfect for any cyclist looking for an easy, secure way to transport their bikes. This durable rack offers strong and...​ 4 Different Hitch Mount Bike Rack Systems by Thule
Are you ready to hit the open road and take your summer adventures up a gear? With Thule's four hitch-mount bike rack designs, you can take your biking experience with you wherever you go! Our quality bike racks are sure to meet all of your needs.

Thule® - Apex™ XT Hitch Mount Bike Rack


The Apex is perfect for any cyclist looking for an easy, secure way to transport their bikes. This durable rack offers strong and...​

4 Different Hitch Mount Bike Rack Systems by Thule

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

New UK 1972 350SL owner....what have I done,?!

Saying hi and hello to all. Not quite sure how it happened but I seem to have acquired a red 72 350SL. Very pretty but with some issues so expect questions lol! I really didn't do much googling for parts availability beforehand - I now know local garage knowledge is low and the Djet seems to strike the fear of god into them. Anyway, summer is coming and I need to get the old gal 100% for a road trip in July. Fingers crossed!
Saying hi and hello to all.

Not quite sure how it happened but I seem to have acquired a red 72 350SL.

Very pretty but with some issues so expect questions lol! I really didn't do much googling for parts availability beforehand - I now know local garage knowledge is low and the Djet seems to strike the fear of god into them.

Anyway, summer is coming and I need to get the old gal 100% for a road trip in July. Fingers crossed!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

Parktronics

We just purchased a 2015 ML250 yesterday and are confused about the Parktronics - specifically, when is the indicator light supposed to be on and when is it supposed to not be lit... As I understand it, the light is On when Parktronics is Off - correct?
We just purchased a 2015 ML250 yesterday and are confused about the Parktronics - specifically, when is the indicator light supposed to be on and when is it supposed to not be lit... As I understand it, the light is On when Parktronics is Off - correct?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

DAS Diaphragm Travel Sensor

Does anyone have a source for the mounting collar and o'ring for the DAS Diaphragm Travel Sensor. This is for the 1999 ML320.Thanks!
Does anyone have a source for the mounting collar and o'ring for the DAS Diaphragm Travel Sensor. This is for the 1999 ML320.Thanks!

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d

2006 SL 500

Hello It has been a while on this wonderful platform. My car would not move forward in gear. Diagnostic analysis indicated a code number P0730 or P0720 not quite sure what number is correct. The message initially was incorrect gear ratio and transmission flush. The car has been parked for over six months in a garage. I decided to warm it up and it would not move if shift in drive mode. Reverse gear moves but not in drive. Any help about what the problem is. Thanks.
Hello
It has been a while on this wonderful platform. My car would not move forward in gear. Diagnostic analysis indicated a code number P0730 or P0720 not quite sure what number is correct. The message initially was incorrect gear ratio and transmission flush. The car has been parked for over six months in a garage. I decided to warm it up and it would not move if shift in drive mode. Reverse gear moves but not in drive. Any help about what the problem is. Thanks.

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d