OM648 injector correction too high?

On my 05 648, when started cold it sometimes misses when first started and generally runs smooth for the first couple of minutes, then the idle is not as smooth as it should be. In SDS under the smooth running screen injector #1 would show around 5.2mm where as all the rest of the injectors are well within spec. I ordered a refurbished injector off ebay and installed it, and the injector was still showing over 5. With this refurbished injector it came with a print out with a new IMA... OM648 injector correction too high?

On my 05 648, when started cold it sometimes misses when first started and generally runs smooth for the first couple of minutes, then the idle is not as smooth as it should be. In SDS under the smooth running screen injector #1 would show around 5.2mm where as all the rest of the injectors are well within spec. I ordered a refurbished injector off ebay and installed it, and the injector was still showing over 5. With this refurbished injector it came with a print out with a new IMA...

OM648 injector correction too high?

---------------------------------------------------------------------------
Visit this link to stop these emails: https://zapier.com/manage/zaps/84252715/stop/?check=635700447bac1ba5e129dce101685c9d