2010 BMW 128i Convertible (E88) L6-3.0L (N52K) Manufacturer Code Page 283
US: MIL ON ECE: No MIL
Service instruction
none
2F4F
2F4F – P0503
Information saved in
DME
Fault code
2F4F – P0503
Fault text
Vehicle speed, plausibility
Fault description
Vehicle Speed Sensor ‘A’ Intermittent/Erratic/High
Condition for fault identification
Test condition:
Speed signal monitor
Mass airflow > 272 mg/stroke and
N > 2400 rpm (manual trans)
N > 2820 rpm (automatic)
and speed = 0 km/h for 5.0 sec.
Terminal condition: Terminal 15, engine on
Voltage condition:
Voltage in onboard electrical system > 10 V
Condition for fault memory entry
5 sec.
Action in service
Read diagnostic control module’s fault memory from DSC
(defective rear right wheelspeed sensor)
Fault effect and breakdown warning
Driver information
Warning light:
None
Default value from CAN
Service instruction
none
2F6C – P0475 (DME)
2F6C – P0475
Information saved in
DME
Fault code
2F6C – P0475
Fault text
Exhaust-gas flap, activation
Fault description
Exhaust Pressure Control Valve
Condition for fault identification
Test condition:
Exhaust valve control-activation monitor
Component must be installed
Tester must be used to trigger component for 10 sec.
