2010 BMW 128i Convertible (E88) L6-3.0L (N52K) Manufacturer Code Page 327
Terminal condition: Engine must be running
Voltage condition:
none
Condition for fault memory entry
65 sec. lambda controller + adaptation deviation in max.
1200 sec.
Action in service
– Visual inspection of affected components
– Find and repair leaks
– Mutual exchange of HFM or injector valves
– Inspect HFM plug-in contacts and electrical wires
– Check fuel pressure
Fault effect and breakdown warning
Driver information
Warning light:
MIL on in 2nd driving cycle
Service instruction
none
29E1 – P0175 (DME)
29E1 – P0175
Information saved in
DME
Fault code
29E1 – P0175
Fault text
Mixture control 2
Fault description
System Too Rich (Bank 2)
Condition for fault identification
Test condition:
Closed-loop lambda mixture control = Active
Terminal condition: Engine must be running
Voltage condition:
none
Condition for fault memory entry
75 sec. lambda controller + adaptation deviation in max.
1200 sec.
Action in service
– Visual inspection of affected components
– Reverse mutual installation positions of HFM or injector
valves
– Check HFM plug contacts and electrical wiring
– Check fuel pressure
– Catalyst on one bank melted (visual inspection through O2
sensor fittings)?
Fault effect and breakdown warning
Driver information
Warning light:
MIL on in 2nd driving cycle
