Mercedes Benz Truck GL 450 (164.871) V8-4.6L (273.923) Technical Service Bulletin # LI72-00_P-048483 Date: 091203
Body - Outer Door Handles Won't Return To End Position
OUTSIDE DOOR HANDLE NO LONGER RETURNS TO END POSITION
Topic number LI72.00-P-048483
Version 1
Design group 72.00 General
Date 12-03-2009
Validity Model series 164 from VIN end no.: 298 504 up to VIN end no.: 407 859
Model series 251 from VIN end no.: 062 281 up to VIN end no.: 083 326
Reason for change Remedy updated / Supersedes DTB T-B-72.00/100c
Reason for block
2010-2020 Mercedes Benz Truck GL 450 (164.871) V8-4.6L (273.923) www.168motive.com Page 171
Complaint:
The outside door handle on the front door or rear door no longer returns automatically to the end position after actuation.
Cause:
Due to a bent pin in the dynamic balancer, the support spring of the bearing bracket can slide out of place or become unhooked.
Remedy:
Notes:
- All four bearing brackets must be repaired.
- The bending of the pin has no influence on the applicability of the repair method!
- Do not replace the lock!
1. Detach door trim (AR72.10-P-1000GZ)
2. Detach outside door handle ( AR72.10-P-2400GZ)
3. Detach door module ( AR72.10-P-0900GZ)
4. Detach door lock ( AR72.10-P-4011GZ)
5. Remove the old support spring from the bearing bracket (if the old spring is no longer present on the bearing bracket, it must be removed from the
door shell).
5.1 Turn the spring through 90?using commercially available needle nose pliers (see attachment 2, item 2).
5.2 Pull the spring down with needle nose pliers (see attachment 3, item 3 and 4).
6. Lightly grease the spring pin (attachment 4, item 1, number 3) over its entire circumference with special lubricant (grease) so that the spring does
not subsequently produce friction noises.
7. Install modified support spring. There is a distinction between the left-hand and right-hand spring.
7.1 Install the spring and slide upwards (see attachment 4 and 5, item 2, 3 and 4). Position the large angled arm of the spring (attachment 4,
number 1) in the upper black plastic bracket.
7.2 Tension the U-shaped angled arm of the spring (attachment 4, number 2) with a commercially available screwdriver and hook it into the
mounting bracket (see attachment 6, item 5, 6 and 7).
8. Install door lock ( AR72.10-P-4011GZ)
9. Mount door module ( AR72.10-P-0900GZ)
10. Mount outside door handle ( AR72.10-P-2400GZ)
11. Mount door trim (AR72.10-P-1000GZ)
* Sufficient for 20 applications, Submit as Local Purchase SLG00660, Qty 1, handling is included
Attachments
2010-2020 Mercedes Benz Truck GL 450 (164.871) V8-4.6L (273.923) www.168motive.com Page 172
Symptoms
Parts
Work units
2010-2020 Mercedes Benz Truck GL 450 (164.871) V8-4.6L (273.923) www.168motive.com Page 173
Validity
Attachment - 1
Attachment - 2
2010-2020 Mercedes Benz Truck GL 450 (164.871) V8-4.6L (273.923) www.168motive.com Page 174
