P2127
2D1C – P2127
Information saved in
DME
Fault code
2D1C – P2127
Fault text
Accelerator pedal module, pedal-position sensor, signal 2
Fault description
Throttle/Pedal Position Sensor/Switch ‘E’ Circuit Low
264
Condition for fault identification
Test condition:
Pedal-position sensor monitor
No fault code currently registered
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system >= 10 V
Condition for fault memory entry
0.02 sec.
Action in service
1) Perform electrical check on sensor wire and power-supply
wires
2) Visual inspection of plug-in contacts (on component and
DME ends) 3) Replace PWG
Fault effect and breakdown warning
Driver information
Warning light:
CC status report: Reduced engine power!
EML ON restricted PW gradient and PW limit via rpm
