2010 BMW 128i Convertible (E88) L6-3.0L (N52K) P Code Charts
none
18
P16A0
2AB3 – P16A0
Information saved in
DME
Fault code
2AB3 – P16A0
Fault text
DME, internal fault: checksum
Fault description
Internal Control Module Memory Check Sum Error in Boot
Software
Condition for fault identification
Test condition:
Monitoring of boot software
After system start with with ignition on
Terminal condition: Terminal 15 ON
Voltage condition:
none
Condition for fault memory entry
No debounce. Fault can be reset by clearing fault memory.
However, a successful diagnostic cycle must be completed
before the fault can be deleted. This can take several
minutes.
Action in service
Flash program correct program version.
Fault effect and breakdown warning
