2010 BMW 128i Convertible (E88) L6-3.0L (N52K) Manufacturer Code Page 293
Fault text
Thermal oil-level sensor
Fault description
Engine Oil Level Too Low
Condition for fault identification
Test condition:
Oil level below 5 liters
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 9 V
Condition for fault memory entry
10 sec.
Action in service
Add 1l engine oil
Fault effect and breakdown warning
Driver information
Warning light:
CC message 28
Service instruction
none
2F10
2F10 – P14C6
Information saved in
DME
Fault code
2F10 – P14C6
Fault text
Radiator blind, bottom
Fault description
Radiator Shutter (Lower) Electrical
Condition for fault identification
Test condition:
1. PKKS must be initialized.
Operation of lower flap:
3 x open and 3 x closed
Or conduct the system test
Terminal condition: Terminal 15 ON
Voltage condition:
Voltage in onboard electrical system > 10 V
Condition for fault memory entry
up to 20 sec.
Action in service
1. Check wire from AKKS PIN 4 to PKKS (connection +)
2. Check ground connection to the PKKS
3. Check retention solenoid (internal short or burned
through)
Fault effect and breakdown warning
