2010 BMW 128i Convertible (E88) L6-3.0L (N52K) Manufacturer Code Page 52
Driving Dynamics Control Switch Low Input
Condition for fault identification
Test condition:
SPORT switch monitoring
only with CAN -11 network
Terminal condition: Terminal 15 ON
Voltage condition:
none
Condition for fault memory entry
none
Action in service
1) Electrical check on switch wire and power wires
2) Visual inspection of plug-in connections (on component
and DME ends)
3) Switch replacement
Fault effect and breakdown warning
Driver information
Warning light:
none
Service instruction
none
2ADA – P2568 (DME)
2ADA – P2568
Information saved in
DME
Fault code
2ADA – P2568
Fault text
EAC sensor, electrical fault
Fault description
Direct Ozone Reduction Catalyst Temperature Sensor
Circuit Range/Performance
Condition for fault identification
Test condition:
EAC sensor must be installed, and the correct data set
(SULEV) must be programmed in the DME
Terminal condition: Terminal 15
Voltage condition:
Voltage in onboard electrical system > 9 V
Condition for fault memory entry
2.5 sec.
Action in service
Replace EAC sensor
Fault effect and breakdown warning
Driver information
Warning light:
MIL in second driving cycle
